Details on how to disassemble HTC One X

Table of contents:

Details on how to disassemble HTC One X
Details on how to disassemble HTC One X
Anonim

If you decide to learn how to disassemble HTC One X, then for this you will definitely need to get acquainted with the detailed instructions, because if you start this operation without it, there is a high probability that you will damage any parts. Accordingly, they will have to be replaced. Today we will give you detailed instructions on how to disassemble this phone model. We strongly recommend that you follow all the steps according to our advice.

Handy and special tools

phone htc one x
phone htc one x

The first thing you need to do is remove the SIM card holder, and this is done as follows. To begin with, we take a simple paper clip (preferably small in size) and press it into the hole where the SIM card is installed. Next, you will need to use a special tool that is designed to open the cases. If you do not have such a device at hand, but you definitely need to know how to disassemble HTC One X and complete this task, then it is recommended to visit a special store and purchase it. Thus, you will be able to separate the back cover. To do this, we draw the tool in three places on the body, theyare near the top corners and one bottom.

Halves

You can use a plastic card to split the phone in two. To do this, we draw it directly along the very perimeter of the screen. So there must be separation. When parsing, it happens that when the back cover is opened, the battery remains on it. In this case, you will also need to separate the battery. This is done using the same plastic card. In fact, the HTC One X phone is not so easy to disassemble, so you need to be extremely careful. Be very careful not to damage certain parts.

Fine work

how to disassemble htc one x
how to disassemble htc one x

How to disassemble HTC One X, dividing it into two parts, you already know. In fact, this process is not so difficult. At the same time, if you act as correctly as possible, you can complete the whole process very quickly and without any damage. After the mobile device is divided into two parts, you can turn off the loops, as well as the screen itself and additional devices. Of course, when the question of how to disassemble HTC One X is completely resolved, and everything was done correctly, then the work will be done very quickly and easily. The most important point is caution, because if one of the parts is damaged, it will require replacement.

Recommended: