Elegance and ergonomics, which are inherent in the appearance of the iPhone-4, in the process of dismantling the smartphone are practically not at risk of being violated. The compactness and thoughtfulness of the constructive part of the device provide for a painless process of disassembly/assembly of the branded model. But this is more of a theoretical definition. In fact, everything is somewhat different when the owner of a popular unit, inexperienced in technical matters, decides to hack the device, not quite a hacker. Exclusively for those who do not know how to disassemble the iPhone-4, this article is written.
Apples made of metal and plastic also deteriorate…
There are many reasons that sometimes force the user to solve purely professional issues on their own. Often, attempts to correct a detected defect, which appeared as a result of mechanical damage or due to a different life situation, end in the appearance of new breakdowns. Therefore, you should not "gnaw" the already "bitten" joy. It would be much wiser to study the main points of the question of how to disassemble the iPhone-4 completely, and only afterconfidence strengthened by knowledge to proceed with the direct implementation of the plan. However, if the adrenaline of excitement fetters your mind, put this idea out of your head and contact the service center for help. Such emotions are known to imply destruction.
How to disassemble iPhone-4: instructions and practical tips
We all know the fairy tale "Porridge from an ax": you should not save on buying a special tool, especially since apple screwdrivers will come in handy in the future. For a successful dismantling you will need:
- Apple pentalobe screwdriver (star profile);
- phillips screw driver;
- flathead screwdriver;
- plastic spatula, plectrum;
- a silicone suction cup is required to separate the touchscreen from the display.
The surface of the table must be flat and clean. A small piece of linen fabric can be used as a working substrate. Naturally, the chair on which you will sit should not stagger. A calm environment, stable stability of the “working” headset and the absence of trembling in the hands are the key to the success of your enterprise.
Mission 1: Get to the battery
The first step will help us partially answer the question of how to disassemble the iPhone-4.
- Unscrew the two fixing screws from the bottom of the gadget.
- Slide up - and the back cover is removed.
- At the bottom of the smartphone on the right, near the battery, unscrew the fixing screw of the protective coverbattery connector.
- Gently pry off the terminal and, pulling the insert, remove our battery.
Mission No. 2. Disable optical equipment
- First of all, you need to remove the SIM tray - a paperclip will help you.
- Unscrew the two horizontally located bolts above the contact pad of the battery connector and, carefully prying with a spatula, disconnect from the system board.
- Take aside (to the right) the unfastened train. Under it in the lower part, near the side of the case, you will see a screw - we twist it.
- The upper part, near the camera, is covered with a plate, which is fixed with 5 bolts. Unscrew everything and then dismantle the protective screen.
- Finally, our goal is the camera: disconnect the connector and carefully remove the optical device.
Mission 3: Command Center
The most responsible task: to dismantle the system board. By the way, if we put the question a little differently: "How to disassemble the iPhone-4 S", then the difference in the answer will be noticeable only in a couple of additionally embedded bolts and a somewhat simplified dismantling scheme, and, of course, in the letter S. The process is identical !
- We snap off all the loops located at the top of the phone, there are only five of them.
- Now you have to unscrew the screws securing the system board. In total, the fourth iPhone device has 4 pieces, and the follower of the S-series has a motherboard fixed with 6 screws.
- Location of bolts: upper part of the case, near the On / Off button - 1, not far to the leftone, the middle of the system board and the left end edge are the other two.
- We take out the "heart" of the iPhone from the case. Don't forget: you do everything with a plastic spatula or pick! Nails, knives and other handy tools are simply unacceptable.
Mission No. 4. Total disarmament
Here we come to the final part of the review-instructions that answer the question of how to disassemble the iPhone-4 with clear recommendations.
- On the bottom of the smartphone, on the right, unscrew the screw that holds the polyphonic module. Dismantle it.
- Now you have to unscrew the 3 bolts at the top of the audio jack, one of which is the female end.
- Remove all attachments of the device: speaker, coaxial cable, vibration motor, etc.
- Unscrew the two screws at the bottom that secure the bottom cable.
- Remove the microphone from the groove (bottom right side of cabinet, inside).
- Disconnect the Home button cable.
- Remove the system connector.
- Unscrew all the screws around the perimeter of the inside of the case. It should be noted that the side bolts do not need to be completely removed - just loosen them.
- Carefully separate the housing frame from the display module. Moreover, you should start from the bottom of the smartphone, since the top of the device is equipped with on-screen cables.
Congratulations - the answer to the question: "How to disassemble iPhone-4" received!
In conclusion. About the Chinese brotherswe will say a word
Today you can find an incredible number of various fakes in the form of copies of iPhones. The super-new iPhone-5S and equally popular pirated 4s and 4Ss have flooded Russian markets with their cheap edge. Therefore, do not be surprised if the Apple logo flaunts on your device, and the back cover keeps trying to fall off by itself. Even in the case when the case is non-separable, and visually there is no hint of a fake, it is worth resorting to an elementary method of checking for originality: look inside the gadget. The counterfeit does not stand up to such scrutiny. Based on the foregoing, it may turn out that you need a different kind of instruction: how to disassemble the Chinese iPhone-4. Nevertheless, the main principle of dismantling remains the same: careful actions, utmost care and confidence, backed by knowledge. However, there is no reason to worry if you purchased a smartphone in a store.
