In life, different situations happen, none of us is immune from unpleasant little things. And sometimes even the most reliable equipment from leading manufacturers can fail at the most crucial moment. And we are honored to tell you about such a useful skill, how to disassemble the iPad yourself. Of course, you will need certain tools, without which it will be problematic to know the inner world of the gadget. You may be able to do this with a regular kitchen knife, but the case will be irreparably damaged, and it will be difficult to assemble the device back and get it in its original form. Therefore, we advise you to focus, get together and take into account all our recommendations.
What would a Jedi need?
In the art of disassembling an iPad, safety is paramount. Therefore, purchase anti-slip paper to ensure that the surfaces adhere.
- Special suction cup with ring grip. It is one of the simplest yet important engineering subjects. You will not be able to do without it when working with any tablets and smartphones.
- A plastic opening tool (looks like a spatula, putty knife, or guitar pick). A serious attribute for this type of work, so as not to pry the display or body parts with nails, fingers or foreign objects.
- Plastic tweezers. It is important to use just such, and not metal, in order to avoid incidents presented by exposure to electric current.
- Set of special screwdrivers. Do not be lazy and look into a special store with spare parts for mobile devices. Tools of this kind are a serious arsenal for both a beginner and a practicing engineer.
Let's start learning magic, or how to disassemble an iPad in 5 minutes?
First, turn off the tablet, wait 15-20 seconds. Lay carefully on non-slip paper or other fixing surface that minimizes slip and prevents scratches.
Now use the suction cup. Place it sequentially on each corner of the display and pull it out as gently as possible. When there is a small gap between the case and the screen, insert a plastic pick into this place and carefully pull along the perimeter of the case. At the same time, lift the next corner of the display with the suction cup. Thus, you opened the device and almost got to its filling.
Warning: do not abruptly tear off the screen from the case, otherwise you will damage the internal metal screws that connect these two parts together. This is a measure invented by the developers to detect such unauthorizedintervention. Because it's time for a screwdriver. Hold the display near the housing at an angle and unscrew the bolts one by one. Then, using plastic tweezers or a special tool, disconnect the cable that is the link between the screen and the board.
Congratulations! The first and most difficult step to solving the problem of how to disassemble an iPad at home has been completed. You are now ready to move on.
Knowing the inner world
No, not my other half, but a device that has just been disassembled.
Here, your attention is given to the logic board - the heart of the tablet, which is screwed to the body with several bolts. If you want to remove it, then first disconnect all cables that are attached to it from other parts - speakers, Wi-Fi module, microphone, camera. Only then boldly grab a screwdriver and carefully remove the bolts.
On the left of the device is Apple's proprietary 30-pin connector, next to which is the chip that provides Wi-Fi to the tablet.
All internal parts are also attached to the body with screws, so if you need to remove any element, carefully dismantle them.
The entire back of the tablet is a massive battery pack, which is responsible for most of the weight of the gadget. But be careful - for better adhesion of the battery and the metal case, a sufficient amount of glue is poured here.
If I have Air 2, will there be any nuances?
Before this, we were trained in a standard procedure that is suitable for work notonly with Apple tablets, but also with other similar devices.
If you want to know how to disassemble the iPad 2, pay special attention to the Home button (or Home). It is fastened with a special fastener, which is located just above the button itself. Use plastic bent-tipped tweezers and remove the fastener. But that's not all. It's time to use a hair dryer or heat gun to warm up the button bracket and melt the glue. The main thing is not to overheat. Now you can dismantle.
Like mini, but no less complex
The "iPad mini" is an upgraded model of the product line, so it's easy to guess that even opening it will be more difficult.
The device itself is more fragile than its predecessors, and inside now all the parts are not only fixed with bolts, but also with a copious amount of glue. Literally everything is flooded with it - the screen and the case, the battery, the board and even the headphone jack. However, the LCD is not glued to the front glass, so at least replacing it won't be a problem.
Before removing the screen, it must be heated with a hair dryer, but it is better with a special heat gun to control the temperature.
So, according to the previous principle, we detached the glass and continue to hold it near the base at an angle. Now be careful, the bolts are located everywhere: both along the perimeter of the case and on the board. Please note that these screws will be the smallest representativesof their own kind and try to disappear from view. So the task of how to disassemble the iPad mini will require some skill and maximum concentration.
Go to the screen itself. It has two hidden and two exposed bolts. Remove them, then similarly lift the display to the glass. This way you get three separate parts that are still connected to each other. To remove the ties, disconnect the display cable with a plastic tool, then remove the additional fixing tape.
Now a metal plate opens up to your eyes in all its glory, which includes 16 more bolts and hides all internal parts from prying eyes. Arm yourself with a screwdriver, remove the screws and continue to explore the contents. You can disconnect the battery by first removing the cable and prying it with a spatula. But we remind you of a large amount of glue, which the manufacturer did not regret at all. You can also disable the digitizer on which the Home button is located.
To remove the logic board itself, you need to heat the back of the case from the outside, but inaccurate intervention can lead to irreversible consequences and overheat the part.
Third Generation
Here everything is the old fashioned way: we warm the screen, pull the suction cup, hook it up, disconnect it. Be careful not to pull too hard to avoid damage to the cables. Next, disconnect the screen by removing all the bolts in the corners, and hold both parts. Disconnect the cable, then the digitizer, which has two latches.
As you can see, if you haveIf you had experience of such work with mini, then the question of how to disassemble the iPad-3 will no longer arise, because the amount of difficulties decreases inversely with the size of the parts.
The fourth book in an unexpected addition to the trilogy
That's how you could call the release of "iPad-4".
In terms of dismantling the device, nothing fundamentally changed here. You may notice a different type of power connector - this is the main difference between the two generations. But it is noteworthy that the new connector does not save space inside the case.
The procedure for sticking is no different from that described earlier. Here, everything is also rigidly fixed with glue, and especially the charge battery, although it is a consumable and tends to wear out quickly. The fact that it is not soldered to the board already makes things easier. More advanced processor, memory and audio codec chips can also be seen on the logic board.
Congratulations! Now you can learn how to disassemble the iPad 4, as well as earlier models, although each of the representatives of the line has its own characteristics and nuances. But, as the proverb says: "The eyes are afraid, the hands are doing."
What do we get as output?
The art of engineering is a challenge for the brave and self-confident, since all work consists of many procedures that require skill and painstaking work. Your companions are diligence, concentration and concentration. Trembling hands and slightly crazy nerves are not working in your favor.
And if you betYour task is how to disassemble the iPad, then another problem arises - to put everything back together and end up with the original device. But if you did everything correctly and accurately and did not lose a single bolt, then everything will work out.
