The cases of modern phones are most often made of plastic, less often - of metal, other types of coatings are used even less often. The screens are protected with glass on more expensive models and plastic on cheaper ones. Phone manufacturers are trying to make phone coatings stronger and more durable, but no one has yet been able to release a phone with an absolutely scratch-resistant coating, and this is unprofitable for sellers. And how you want your phone to look new in a month and a year after purchase! And one of the ways to preserve its original appearance is to stick protective films on its body and screen. Next, the technology of how to glue the film on the phone will be described.
Protective film on the screen is of two types - universal and specialized, for a particular phone model. It is best to give preference to the second type of film, since it already has the desired shape, and you do not have to cut anything yourself. If you still bought a universal film, before applying the sticker, you need to attach it to the screen and cut off everything superfluous with sharp scissors.
First screenphone must be cleaned of dust and dirt. This can be done with a microfiber cloth and a special liquid for cleaning displays, there should be no questions about this, another thing is how to glue? The film is glued to the phone in two stages: first, the first protective layer is removed, exposing the adhesive surface, and the film is applied to the phone screen. At this stage, the main thing is to stick the coating evenly and expel all the bubbles, this can be done using a bank card. After you have pasted the film in the right way, you can remove the second protective layer. Now the film is fixed and it will protect the screen from scratches.
How to glue the film on the phone if you want to protect its body from damage? In this case, one of the best options is to wrap it with carbon film. How to glue the carbon film on the phone? This question arises for many who are faced with a similar task for the first time. On the question of how to glue a film on a phone, articles on wrapping a car with film can be very helpful, but there are some nuances here.
You will need carbon film, as well as a stationery knife, hair dryer, thinner. Degrease the surface with a solvent, cut off the necessary piece of film with a margin on all sides. It is better to paste over the parts of the phone separately if its case is collapsible. For pasting the bends, heat the film with a hairdryer - this way it becomes elastic and can be pulled. The film must be tucked under the part, otherwise it will peel off. Also an important condition for pasting is the removal of air bubbles.from under it, for this you can use the same plastic card. Be careful not to cover the openings of the microphone and speaker with film when pasting the case, as well as the buttons and connectors of the phone.
Using this technology, you can easily stick a film on an iPhone and on any other phone model. The film coating will preserve the original appearance of your phone, and in case of scratches, the old film can be quickly and without a trace removed to apply a new one.
