“Protective glass on the phone: how to glue it?” - a similar question is of interest to a considerable number of users. First, we immediately note that the process of installing a protective glass for a smartphone has some subtleties, but in general it does not seem to be something super complicated. Even if you have never done this before, you can achieve the same result as you get in service centers or mobile phone stores, with the only difference being that the installation of protective glass in the above-mentioned companies is a paid service. All that is required from the user himself is a set of tools and a little attention.
Protective glass on the phone: how to glue
Many users who are faced with the need for such an operation do not even suspect that not only the correct sequence plays an important role hereactivities, but also a well-prepared workplace. If there is a mess on the table, and materials and tools are scattered, then it will be more difficult to achieve a good result. The more quickly you can use this or that element, the better the bonding will be. Therefore, make sure in advance that all unnecessary components are removed from the workplace or at least moved away from the operation. So, here we have a protective glass on the phone. How to stick, we will tell a little lower, but for now let's talk about what it is and how it differs from the film.
Differences between glass and film
Usually, users clearly understand which of these materials they are talking about. However, some people do not understand the elementary differences between film and protective glass. Let's talk about this in more detail. The second material is better able to withstand mechanical stress. If you drop a phone protected by this material, only the glass will be damaged. It can then be replaced. But if an ordinary film was pasted on the device, then everything is much more serious. This may require a complete screen replacement. And it will cost an order of magnitude more. For the sake of justice, we note that sharp objects are not afraid of glass. You can drive on it with keys, a knife, scissors - whatever. But it won't take any damage. This, unfortunately, cannot be said about the film. Finally, I would like to note that glass is much easier to glue. Well, now let's move on to the considerationthe question of how to install a protective glass on the phone, in more detail.
Preparing the screen
Before installing the protective glass on the phone, you should carefully prepare the display surface for this operation. The process will consist of several basic steps. If you have previously applied a protective film to the screen, you need to remove it by pulling on the edge. We will not need more film in the future, and it can be thrown into the trash can. We open the set with protective glass. It should contain a cloth made of microfiber. We will need it in the future. If the kit does not include an alcoholized cloth, then you can wet a wet disc with it, after which you should wipe the screen. You can wait until the display is dry and then use a microfiber cloth as directed. Before starting such work, it is recommended to wash your hands with soap and water to avoid greasy stains on the screen. When the screen is clear, you can proceed to the next step. So, we continue to answer the question of users about how to use a protective glass on the phone, how to glue it.
Installation
When you pick up a protective glass for your phone, you will see that it is covered on one side with a special layer of film. This is the adhesive side, with which the element will need to be applied to the device screen itself. Now we remove the film, preparing the glass for the gluing process. It should not be keptfor the surface, but for the edges, in order to avoid loss of properties. When you align the glass, we press it to the screen itself. The coating of the first one is made in such a way that nothing else needs to be done, it sticks by itself.
Complete the operation and remove the air
After you install the protective glass on the phone, you will notice that there are small bubbles under it. It's the air that's left inside. You can remove it quite simply. To do this, smooth the glass from the center in the direction of the bubbles. Thus, they can be “squeezed out” abroad. In the end, you will get an element that sits perfectly on the screen surface. Some users ask a question about how much a protective glass for a phone costs. Note that the price for it falls in the range from 300 to a thousand rubles, depending on the brand and quality, as well as on the phone model. Now, after reading this article, you know the answer to the question of how to apply protective glass on the phone, how to glue it correctly.
Which protective glass to choose
At present, a considerable number of companies are engaged in the release of such accessories. Nevertheless, protective glasses from Ainy are considered to be the best of them. Why? What is the best screen protector for a phone? The products of this company have proven themselves well in numerous tests. Especially closely, experts monitored the behavior of the glasses installed on the devices of the American company Apple. It was found that with a relatively small thickness, accessories provide excellentprotection of the screen from external mechanical influences. It should be noted that the glasses of this company are made of five layers, the final one being oleophobic.
Func, for example, also produces similar products. Its products are in about the same price category. It was noted that many accessories are hardened, but in terms of quality and level of protection they fall short of Ainy elements, which, in principle, was confirmed by endurance tests.
