How to stick a protective glass on the phone? Probably, many users have faced the need to give additional protection to the display of their device. By the way, the film can protect the device well from external mechanical and physical influences, extending the life of the screen. Currently, a protective glass for a phone (reviews will be presented below) costs a couple of hundred rubles. Sticking it on will cost about the same amount, but not everyone wants to give money for an operation that you can successfully do yourself. That is why the question of how to stick a protective glass on the phone is so relevant.
What is this item?
The protective glass on the phone screen with its appearance resembles the most ordinary film. As a result of the use of special technologies, it becomes not only transparent, but alsoflexible. Only the density changes in this case, and upwards. In ordinary cases, the thickness of the protective glass, which we used to call the film, falls within the interval starting at 0.15 and ending at 0.33 millimeters. You do not need to be an expert to confidently say that this is not so much in reality. However, before wondering how to stick a protective glass on a phone, the user must clearly understand that there are still certain differences between glass and film. And now we'll talk about them.
Film versus glass: the main differences
The basis here is those properties for which, in fact, the protective glass was created. Thus, firstly, this material is more resistant to scratching than film. In principle, you can verify this yourself. To do this, you can use any sharp objects - a knife, keys, scissors - all this, when in contact with the glass, will not harm it. Secondly, the film is more prone to “piercing” in the case of tight mechanical contact. In other words, the glass will save the screen from damage upon impact, unlike the film. In this case, it will, of course, break. But the display will remain intact, and you can replace another glass. Well, you can complete the analysis of the differences by saying that the glass is pressed against the screen surface several times denser and stronger. Yes, and it is glued faster and more conveniently. Well, now you can proceed to consider how to stick a protective glass on your phone.
What needs to be done before starting work?
Of course, first of all, you should take care of putting things in order at the workplace, so as not to lose tools during the operation. When everything is ready, we will open the package and see what can be found there. The equipment in the kits is usually as follows: a cloth made of microfiber, an alcohol wipe, a protective glass. In some cases, additional elements may be present, such as a horizontal plate for smoothing. To avoid greasy stains on the screen, wash your hands with soap and dry them thoroughly. Now let's move on to the process of applying the components from the kit.
Preparing the screen
If your phone already has a protective film, it should be removed. We won't be using it anywhere else. After that, we take the alcohol wipe that comes with the kit. If it was not supplied in the box, then you can soak an ordinary cotton pad in alcohol, and it will replace this tool for you. Then we wipe the screen of the device and let it dry. You can speed up the process by using a dry cloth, or even better, a microfiber cloth.
Sticking process
You may notice that on the side where the glue is applied, the glass is covered with a special layer of film. It will need to be removed before gluing to the screen. After you have removed the layer, you need to correctly position the glass, and then apply it to the surface of the device.
Elimination of the air gap
It is unlikely that someone will be able to perfectly paste the glass right away. Each user can make sure that under the new coating there will be small bubbles from the air remaining inside. What to do in this case? Manufacturers recommend dealing with this problem by smoothing the glass from the center towards the individual bubble. This way you can "push" him over the edge. After that, it remains only to remove the dust. And on this, the operation of gluing the protective glass will be completed.
Glass from Ainy. Reviews
Today, protection products from Ainy are in great demand. The thickness of this glass is 0.33 mm. This was discussed earlier, almost at the very beginning of the article. Numerous tests have shown that the glass from this company greatly increases the protection of the screen and can save it in the event of unintentional tight mechanical contact. In general, in all respects, Ainy protective glass is ahead of the competition. This is evidenced by the reviews of customers whose devices were saved from damage.
