Many smartphone users are concerned about the question of how to stick a protective film on a smartphone? It needs to be de alt with, as protecting the device is an important factor in the use.
Modern gadgets - phones, tablets and others - have the most vulnerable place for damage - the display. If it is damaged, ease of use often decreases, so it is clearly not necessary to allow this element to break. Protective films and glasses do just that for the most part of this task.
Which protection is better
Before considering how to stick a protective film on a smartphone, let's also get acquainted with another protective accessory and its differences from a film.
The main task of protective glasses is to protect the device in case it falls to the ground. Of course, such an element will also perform standard functions: scratch prevention, dust protection, and so on. According to manufacturers, when a smartphone falls, it is the protective glass that will break, andnot the screen itself. Another plus of this accessory is that it goes well with the device and does not distort its familiar look. Also, touches and clicks are perfectly transmitted through the glass, so the protection will not affect the sensitivity of the screen in any way.
Film is more popular item for smartphone protection. Its main function is to protect the phone screen from scratches. Also, depending on the type of film, it can perform the following tasks:
- Protect against sun glare and user fingerprints. Matte protective film has such functions.
- Reflection of objects. The film acts as a mirror when the smartphone screen is locked. This accessory is called Mirror Guard.
- Regular scratch protection. Such defects can appear from keys, coins and other things that can damage the device. This film is standard and is called glossy.
As you can see, glass has more and more popular functionality than a protective film. Therefore, preference, of course, should be given to the first option. In addition, it will take a lot of effort and patience to stick a protective film on your smartphone yourself.
How to choose a protective accessory
Manufacturers have done a very good job and now produce protective films for a specific smartphone model. Therefore, the choice is not particularly worth tormenting - you just need to specify the name of your phone.
It should be borne in mind that allmodels of the same manufacturer are different in size, so it is not enough to select only the name of the phone. Be sure to indicate its model in order to select a film that has all the necessary holes for speakers and buttons.
There are universal protective accessories designed for rare smartphones that do not have specialized films. In this case, the user can cut the layout himself, which will be superimposed on the screen.
How to remove the old protective film
Before sticking a protective film on the smartphone screen, you need to remove the old one to prepare the screen for manipulation.
If the protective accessory is relatively new on the phone, it will be removed quite easily: just pry the edge with a fingernail or a sharp object. However, if the film has been on the screen for a long time, removing it may cause problems.
If you can’t quickly remove the old film, then you should use ordinary packing tape, which is sold in all stationery stores. Before the procedure, it is advisable to thoroughly clean the screen surface with alcohol so that the adhesive tape sticks well. Now a small segment needs to be applied to the edge of the old film and pulling, at the same time trying to pick up the same edge with a thin object. This will remove the tight protective film from the screen.
Apply new protective film
Now let's look at how to stick a protective film on your smartphone yourself.
A very important factor that affects the outcome of the work is the dustiness of the room,in which the operation takes place. For work, you need to choose a room so that the amount of dust is minimal. A great option would be a bathroom or kitchen. If, nevertheless, gluing will be carried out in another place, it should be prepared in advance.
Preparation of the premises
Before sticking a protective film on a smartphone, it is necessary to temporarily remove from the room all things that can collect dust: towels, rugs, etc. What cannot be removed should be thoroughly vacuumed. After that, be sure to wipe the table on which the operation will be performed with a damp cloth. It will not be superfluous to wash the floor so that the result is as satisfactory as possible.
The room is now ready for the protective film application.
It may seem that such preparations are too global for putting a protective accessory on the phone. However, the actions are not at all exaggerated. The slightest speck of dust that has fallen on the screen during the gluing of the film can cause air to accumulate on the surface of the screen, which is not so easy to remove. Therefore, it is better to prepare the conditions well in advance than to correct your own mistakes later.
Required Items
Before describing the instructions on how to properly stick a protective film on a smartphone, you should figure out what tools you will need for this process. Must have:
- A liquid containing alcohol, or alcohol itself to wipe the screen.
- A thin object such as a plastic card.
- A special cloth designed to clean the screen (included with the film).
- Scotch.
Before sticking the protective film, it is advisable to wash your hands well to get rid of excess dirt and dust.
Step by step instructions
When all the preparations are made, you can begin the process itself.
- First of all, you need to remove the old coating and carefully wipe the smartphone screen with a special cloth. If necessary, you can use alcohol or an alcohol-containing liquid.
- Now you need to remove the protective coating of the adhesive side of the film and, holding the object by the edges, roughly position it along the contour of the smartphone display, but without lowering it.
- Starting at any edge, gradually apply the film to the entire surface of the screen.
- With a flat thin object, smooth the coating in one direction, that is, from top to bottom or vice versa, but only once.
- If air bubbles form, they must be removed immediately. To do this, take two strips of tape. One needs to lift the film, and the other to remove dust particles in place of the bubble. Then stick the film back.
Multi-film overlay
Now let's figure out how to stick a universal protective film on a smartphone. First you need to cut it to fit the phone screen. To do this, you will need the following tools:
- Marker of any color, preferably thin.
- Scalpel or stationery knife.
- Covering where you cancut the film.
First you need to mark up the future model of the protective film. You can simply measure the length and width of the smartphone screen with a ruler, and then transfer the results to the universal coverage. With this method, it is worth considering small indents along the edges if measurements were made of the entire area of \u200b\u200bthe phone.
The second way is to make a copy of the phone using a printer, and then trace the outline on the film. Here you should also take into account the distance from the edges of the smartphone.
The third way is the most reliable. You can take the old coating and use it as a sample. In this situation, the indentation can be ignored, since the old film is already adjusted accordingly.
All further actions are performed in the same way as in the previous paragraph.
Expert Tips
To ensure a smooth process, there are a few things to keep in mind:
- Be sure to carefully prepare the room for the process of sticking the film. This item must not be neglected.
- It is good to clean the screen after peeling off the old protective accessory with alcohol or other liquid.
- Be sure to run a flat object over the surface after gluing to expel excess air.
If you follow all the instructions and recommendations, then the question of how to stick a protective film on a smartphone will not cause any problems.
