Today, in the world of modern technology, smartphones play a huge role in our lives. It is already difficult to imagine how people did not use phones several decades ago. Not even modern smartphones, which have a huge number of useful features, but simple phones to just make calls. Of course, you won’t surprise anyone with new devices, they have become a necessity.
Unfortunately, smartphones can break down at any time, not even fall and crash, but simply pick up a virus and stop turning on. What to do in this situation? If the phone does not turn on or freezes, then it needs to be reflashed. Let's look at how to flash Android through Recovery.
Troubleshooting. What to do if the phone does not turn on or freezes?
It doesn't matter if you have a new device from Samsung or an old phone from a Chinese company, they can start to freeze at any moment or even stop turning on. Before flashing your device, you need to try resetting your smartphone to factory settings. Of course, this can only help if you havethe memory was full or there was a software failure. How to do it? We go into the settings, go to the "Restore and reset" tab (maybe it is called differently for you) and click on the "Reset to factory settings" button. After that, your smartphone will clear all memory and reboot.
If this did not help you, then you should try installing a new firmware. With what it can be connected? As a rule, various phone failures are caused by viruses that cannot be cleared by a simple factory reset. Malicious files get into system files that are not cleaned up during system restore. The new firmware contains other files that will not contain viruses. If you do everything right, then get rid of viruses and problems associated with them. First you need to consider how to flash Android through Recovery.
What is Recovery?
Flashing a phone is quite simple, so you should not immediately run to a service center for troubleshooting. So you can save a lot of money. Flashing the device will cost you 500-1000 rubles. How to flash "Android" from a flash drive through "Recovery"? Before we look at this, it is necessary to understand what Recovery is. This is software with which you can reset your smartphone to factory settings or reinstall the system. It is found in all Android devices. If you did not install additional files, then you will have a simple "Recovery", which is enough to install the firmware. If you want to install the converted software, you will have to install a custom Recovery.
How to flash "Android" through "Recovery"? Menu
Before installing new software, you must enter the "Recovery". It resembles the BIOS that is present on a regular computer. To learn how to flash Android through Recovery, you need to enter the menu of our software. How to do it? First, turn off our smartphone. To enter the desired mode, you need to press the "Volume +" button, the "Home" button and after a few seconds the power button. You may not be able to log in this way, since there are various combinations to enter Recovery (the article describes the most common method).
What else do you need?
Before you proceed to install a new firmware, you need to rummage on the Internet and find a suitable version. As a rule, they are not available on official sites, so many users create backup copies, which they then reinstall on their device or share for other users. You can find the firmware on special sites, the most popular is w3bsit3-dns.com. Perhaps you are an advanced user, and you are already tired of the usual firmware. It is for such people that some changes are made to the standard set. To install the converted firmware, you need to install custom Recovery.
How to flash "Android" through "Recovery"? Instruction
You must understand that you are flashing the device at your own peril and risk. If something goes wrong, then your phone will not be fixed under warranty. Of course, if you are determined to reflash your smartphone, then you need to find the right firmware. The installation process is quite primitive. First, download the appropriate software and move it to the device's memory or to a memory card. Then we go to "Recovery" and select the item Apply update from external storage. You must confirm your actions to start the installation.
As soon as the flashing is completed, you need to click on the Wipe data/factory reset button. This will clear all information about the old software. At the last step, all that remains is to click on the Reboot system now button. Your device will start to boot with the new firmware. That's all. How to flash "Android" through "Recovery"? Now you can answer this question too. There is nothing complicated, it just takes a little time and attention.
How do I restore old software?
You may have installed a custom version of the firmware and you didn't like it. How now to return everything to its place? Unfortunately, there is no button that could simply return the old settings. To return the stock firmware, you need to reinstall the software on your device. You download the usual firmware that will fit under it, and install through the "Recovery".
Conclusion
How to flash an Android phone through Recovery?As you have already noticed, there is nothing complicated in flashing the device. The main thing is to follow the recommendations. Within an hour you will receive an updated phone that will work great.
