Every user of a modern smartphone wants the gadget to work for a long time and not lose its appearance. To preserve the smoothness of the screen, phones are covered with a protective film, but it is not eternal, so sooner or later it will need to be replaced, but not everyone knows how to stick a bubble-free film on a phone. So that the result does not upset you and there are no errors in the process of sticking the film, you need to know a few very important nuances.
What is film for?
First of all, you need to figure out what this film is for. Over time, any screen becomes covered with a layer of dust, small scratches, rubbed off, fingerprints appear, and the like. As a result, the phone becomes untidy, the contrast and brightness decrease, the screen sensitivity and color quality deteriorate. The protective transparent film completely covers the screen of the tablet or smartphone, while the quality of work and the image does not change. For today itthe best protection against dirt and scratches, it also keeps harmful UV light out, the screen becomes more readable in bright sunlight, and there is no glare, but you need to know how to stick a bubble-free film on your phone.
What you need
First of all, you need to choose a room where there is the least dust, it can even be a bathroom. For the best effect, turn on hot water so that the steam settles the dust faster. Also bring a regular plastic credit card, a cloth, and lint-free wipes. Some smartphone users recommend a terry towel. Now you can stick a protective film on your phone without much fear that dust will settle on the screen during operation. And from now on, you can safely move on to the next stage.
General recommendations
You cannot start the process of sticking the film right away. First you need to prepare and stock up on the materials discussed above. Having figured out where to stick the film on the phone, you need to remember a few important tips. Wipe the surface of the screen with wet wipes, as a result, some streaks may remain, but stains should not be allowed. After that, the phone is wiped with a terry towel, but it is better to use a cloth that is often sold along with a protective film. It is strictly forbidden to use alcohol-containing substances or cleaning agents. Also, do not spit, breathe or blow on the screen - only a lint-free cloth and wet wipes.
Instructions
With this simple instruction, you will learn how to stick a bubble-free film on your phone:
- Prepare materials, film, work area and wash your hands. Lay down a blank sheet, set up good lighting.
- The red sticker or number 1 marks the first layer of film to be peeled off. The film is gradually applied to the phone from top to bottom.
- The main stage where you need to thoroughly clean the screen from even the smallest particles, due to which bubbles appear. For this, a silk rag is used, which is sold complete with a film. Do not use towels with fine pile or cotton pads for this.
- Stick the film, do not touch the sticky side with your fingers. Do everything slowly, smoothly smooth the fixed part from the center to the edges. The film must not extend beyond the screen.
- After gluing, all irregularities can be smoothed out with your fingers or a card from the center to the sides, if necessary.
- Number 2 or a blue sticker marks the second layer, which must be removed at the end of the work. You can remove it immediately, but if you have little experience, then do not rush.
Now you know how to stick a bubble-free film on your phone. But there are some more tips that will help you in this difficult matter and make the work as simple, fast and correct as possible.
Types and types of films
It is necessary to understand that it is quite difficult to stick the film on the phone correctly the first time, especially to make sure that there are no bubbles. It's hard to figure out which is better.choose. Naturally, you can stick a universal film on the phone, but it does not always meet the requirements of users. It is better to choose some specific one, but there are four types of it:
- Matte - allows you to view texts and videos without any problems, including in very strong sunlight or artificial lighting.
- Glossy - the phone gets additional beauty, the appearance is significantly improved. But in bright sunlight or strong lighting, glare appears.
- Mirror - made from special glass, the phone gets extra shine and chic. Disadvantages are similar to glossy films. There are models for the back cover of the phone, which replace the case, covering the smartphone from both sides.
- Capable of clean peel-off - peels well, does not leave glue. It has a very thin layer of silicone, perfectly sticks to the screen, leaves no residue, can be re-glued many times.
Film Features
How to stick a bubble-free film on a phone is far from the main question. You also need to choose the film itself, and it is better to buy the one that is made specifically for your phone model. Basically, its size is slightly smaller than the screen parameters - by 0.1-0.5 mm. This is done so that the edges of the film do not cling and do not lag behind the surface. If the film does not lag behind, then debris will not be able to get under it, and the screen will remain clean, intact and without scratches.
In the event that you have purchased a large sheet of film, the dimensions of which must be manually adjusted to a specific model, then you need to figure out how to cut the film on the phone correctly. It happens that the first time something does not work out - you should not be upset, you just need to practice a little. If the film is stuck on crookedly, remove it, but do not pry it off. Wash it, dry it and get back to work. Some masters, on the contrary, advise to pre-wet the film, shake it and only then start gluing, squeezing out the remaining water from under it.
