Smartphone is an expensive thing. Even when purchasing a budget class device from 5 to 15 thousand rubles, we want it to serve for a long time and faithfully. The fidelity of the gadget, in turn, depends on two parameters: internal and external. And if we cannot influence the first one (represented by the hardware), then we can overcome external factors just the same. We can protect our smartphone, if not from drowning, then certainly from mechanical impact. And the glass on the phone will help us in this. How to glue it? This is what we will talk about today.
Why do I need protective glass
It is hard to disagree with the fact that prolonged use of any smartphone does not imply the appearance of chips, cracks, scratches, scuffs. This fate is typical not only for the side faces, the top and bottom ends and the back panel, but also for the front part. And there is perhaps the most important element - the smartphone screen. Protective glasses were inventedjust to protect the display of the device. You can use a film, but it has a lower protection factor. In any case, it is important to know how to properly glue the protective glass on the phone.
What it is
The appearance of the protective glass is similar to the exterior of the film. Indeed, the tasks of these two elements are similar to each other. However, protective glass is rightly considered to be a more reliable component, since it has a greater density compared to the film. In addition, it is transparent and flexible, and this also has a certain importance. Of course, it will cost more than the film. However, it is worth it, especially in cases where there is either a high probability of mechanical impact, or when the gadget is really expensive. For everyone, this bar is different, but most users prefer to buy glasses if their devices cost more than 10-15 thousand rubles. When buying a protective glass, the user reduces the probability of damage to the main screen to almost zero, since the component described above will take all the impact. Before talking about how to glue tempered glass on a phone, I would like to focus on the advantages of the element.
Functions and useful properties
There is not much to say about the functions of the protective glass. From its name it is already clear why it was developed and what it is intended for. Whether it's a feature that you can talk about for hours. Their list includes, for example,resistance to scratches and other similar damage. Someone may doubt this parameter, but usually all doubts disappear after an indicative test. To do this, you can use ordinary keys. Run the sharpened edges across the glass and you'll see that it really doesn't mark.
The second useful feature of protective glass is shock absorption. We have already mentioned this briefly above. A large number of smartphones, when dropped down the surface of the screen, receive physical damage up to the complete breaking of the display. With protective glass, this problem will be solved, because it will break instead of the screen. By the way, the word “break” here should also be understood a little differently from its usual meaning. Fragments from the phone protective glass do not scatter to the sides. Finally, we can note the fact that the glass is held very, very reliably. Especially if we compare it with a simplified element - a film. Users who so often ask questions about how to properly glue glass on a phone can be glad to know that this operation does not require any special experience.
Considering the package
A very large number of requests are connected precisely with how to glue the film (glass) on the iPhone 6 phone. However, it should be understood that the process is, in general, similar for other devices. And why then dwell on specific models, if you can describe the operation universally? First of all, let's see what's inprotective glass packaging? Different manufacturers offer different equipment, but usually there is the glass itself, an alcohol wipe and a cloth made of a special material. If there are no rags or napkins, then you can use improvised analogues, this is unprincipled.
Glass on the phone: how to glue? Surface preparation
If you have previously installed a film or glass, these components will need to be removed. To do this, remove the cover, if there is one, then we cling to the edge of the element. To prevent the appearance of greasy stains on the glass, you should thoroughly wash your hands and dry them in advance. By the way, the preparation of the workplace remains an important step. You need a flat horizontal surface and powerful lighting. It could be, for example, a table. Lighting will help to avoid unnoticed streaks and dusty areas. So what does it take to integrate glass on a phone? How to glue it? The correct operation will only be if the “bare” screen is processed in advance.
Why cleanup is needed
Clean the screen freed from the film or glass with a damp disc or alcohol wipe soaked in alcohol. Wipe the screen carefully so that no dirt remains on it. After that, you should wipe it with a special cloth, if it is included in the kit. If not, then you need to find an analogue. Now it's time to attach the glass to the phone. How to glue? Find out more.
The most importantstage
There is a special film on the adhesive side of the glass. It needs to be removed. After that, we apply the glass itself to the screen. Care should be taken to ensure that it is aligned with the edges of the device, combined with the speaker and controls. By the way, you need to remember that you can only hold the protective glass by the edges. Only in this case there will be no traces after the operation. When the fit is complete, simply lower the component onto the screen. The glass will stick on its own. Great, now we know how to glue the glass on the phone.
Are there any cons
Yes, like other elements, protective glass has some drawbacks. Some users who are interested in how to glue protective glasses on the phone may think that the main disadvantage is the indicative complexity of the integration process. Like, if you stick it wrong the first time, then you can’t do anything later. In fact, it's not about that right now. The main disadvantage of this component is the fact that the device on which you will glue it will become more voluminous and heavy. However, if this does not bother you, and you are not very sensitive to the weight and size indicators of the phone, but you want to protect it, then you can contact mobile phone stores. They will offer not only the best products, but for extra money they will be able to paste glass with high quality.
Pitfalls and tricks
Most users are afraid of air bubbles. Or rather, that they will remain. Few people can boast that they glue the protective glass neatly the first time, and whenthere are no bubbles. However, they can be easily de alt with with a dry cloth. The procedure is simple to horror: just squeeze out the bubbles from the center to the periphery. The ability to glue protective glass will save money that is charged for this procedure in mobile phone stores.
Prices
Now protective glasses are quite important and common accessories. Therefore, a large number of companies are engaged in their production. Budget options are represented mainly by Chinese firms, which was to be expected. However, they are not that bad. Glasses of different brands differ only in the degree of hardening. However, one should not think that glass from a Chinese company will not provide the necessary degree of security. Now that we have learned how to glue tempered glass on a phone, we can move on from words to deeds.
