In the design of the upper part of various rooms, ceiling lights are increasingly appearing. For stretch ceilings, LED lights are the safest option as they generate a small amount of heat. Without these decorative elements, modern interiors are already hard to imagine. They are used in most cases.
Advantages of LED fixtures
In many homes, ceiling lights are installed for stretch ceilings. LED devices are the most preferred option, as they have an extensive list of advantages. The most important ones are listed below:
- low power consumption;
- very long service life;
- no flicker effect during operation;
- possibility of reliable operation at different temperature conditions;
- radiation directivity;
- relatively easy installation;
- work in networks with different voltages.
In the manufacture of housings for such products, as a rule, durable plastic and aluminum are used, due to which they are able to withstand fairly strong mechanical stress without destruction. They are not afraid of light shocks and vibrations.
Methods of fastening elements
Before purchasing, you need to choose the right LED lights for your home. Ceiling appliances can be fixed in different ways. The lanterns built into the upper structure are more common. After installation, their visible part is in the same plane as the ceiling surface.
Less popular, but promising in terms of design solutions, suspended products suspended on a hook that is fixed to the ceiling. Before stretching, a special hole is made in the canvas in one place or another. A suspension is pulled through it.
An easier option is to install a surface mounted LED downlight. In this case, the mortgage base with electrical wiring is prepared in advance. Auxiliary rings are glued at the installation site, after which holes of certain sizes are made.
Number of sources
Lighting devices can be point or cascade type. In the first case, only one source is involved, and in the second, several at once. The final choice depends on whether the backlight is local or general. However, there are exceptions in some situations.
Spot fixtures have one light source, so their size is verycompact. They are mainly used in kitchens, bathrooms and hallways. For general lighting, you need to use several elements at once, placing them at a short distance.
Cascade analogues are whole structures that differ in form and efficiency. They contain several light sources, thanks to which they allow you to create an atmosphere of elegance in the room. Very often, these platforms are located above the dining table.
Product cost
Many people want to buy LED lights. Their price is low, so they are available to a wide range of consumers. However, the final cost of production depends on various factors. The manufacturer, design possibilities, materials used and power are taken into account.
The table below shows how much a product of one type or another costs on average.
| Appliance type | Cost in rubles |
| Embedded | 100-1500 |
| Invoice | 800-5000 |
| Hanging | 2000-20000 |
The cheapest are LED spotlights. Their price is quite low, but they are usually purchased in large quantities. To fully illuminate the room, you need to install several elements.
Armstrong LED lights
For commercial premises, panel-shaped appliances are more suitable. LEDs in this case are located on the body of the products. Their number may vary depending on the manufacturer. The main advantage is the even distribution of light. However, much depends on the dimensions of the panels.
When buying LED lamps "Armstrong", you should pay attention to a number of important factors. First of all, this concerns the body of the device, which performs the function of heat removal. If overheating does not occur during operation, the product life can be very long.
Some manufacturers have replaced aluminum with plastic, resulting in poor heat dissipation. In this regard, many models begin to lose their luminous flux after a short period of time. They fail quickly enough.
Only high-quality ceiling lamps for stretch ceilings can serve for a long time. LED panels from reliable manufacturers will cost a lot, but will be used several times longer than inexpensive counterparts from unknown brands.
Some manufacturers save even on a panel that performs a light-scattering function. They often make it from acrylic glass, which quickly becomes hazy. Because of this, not only aesthetic characteristics deteriorate, but also technical indicators are significantly reduced.
Finalpart
The information provided should help if the room is supposed to use ceiling lights for stretch ceilings. LED analogues will not only save on electricity, but also beautifully decorate the upper part of any room, regardless of its purpose, especially since the product range is very diverse.
