How to make forwarding to MTS and receive calls to the number you need? This question is quite relevant for those people who often have to be on business trips. Also, the idea of setting up call forwarding can be a great way out when the mobile phone was simply left at home. In this case, it is enough to redirect calls from that SIM card to any other number, and all calls will go to it. So how to put forwarding on MTS? This issue will be discussed in detail in the current article. In addition, we will talk about how you can turn it off when the need for it has disappeared, and also pay attention to a number of subtleties when using this service.
Service Description
The service of "transferring" calls, or "forwarding", has been popular almost since its inception. Indeed, after all, this function can be useful at one time or another to any subscriber of a mobile operator. Its essenceis that all calls from one number can be forwarded to another. At the same time, when setting call forwarding, you can set the condition under which they will be forwarded. In other words, before forwarding to MTS, you should determine the situation in which it is necessary to redirect calls to another number.
There are several options:
- if the number is busy;
- if the device is not registered on the network or is simply disabled;
- no response;
- all calls.
How to set up forwarding to MTS for each specific condition will be described later.
Features of using the service
- When selecting the "No answer" condition for redirecting incoming calls, you can independently set the time interval after which the call will be sent to another specified number.
- The "redirected" call is paid: the cost depends on the price per minute of communication from the number from which it was originally made (more details will be discussed later).
- Before leaving the territory of the home region, you should disable the service. In the event that there is a need for it, then it is necessary to replenish the balance of the main number in advance.
Will roaming call forwarding help?
While roaming, the call forwarding service will still operate, however, the cost of calls will increase sharply and will consist of the followingitems:
- cost of a minute of an incoming call at roaming rates;
- cost per minute of an outgoing call at roaming rates in the direction of the forwarded call.
How much does it cost to install and temporarily use call forwarding?
The service is provided free of charge and does not imply a subscription fee. All write-offs that can be made are possible only with the acceptance of forwarded calls. The cost of such a call is equal to the price of one minute of communication for an outgoing call from the main number.
Thus, it is recommended to turn off the service immediately after the need for it has disappeared - this will avoid unplanned costs for mobile communications.
How to redirect to MTS?
There are several ways to activate this service, which is discussed in the current article.
- Internet service.
- Request help from a contact center specialist.
- Specialized menu of a mobile gadget (every modern device has a call setting function, which certainly contains such a parameter as “forwarding”).
- Sending a short request via SMS channel.
- Service of short universal requests, which are entered directly from the mobile number from which calls must be redirected.
If the subscriber is faced with the question of how to enable forwarding to MTS, ifthere is no access to the device, then the last three points should be skipped, since the presence of the number for which the service should be activated is required.
In the first case, just go to your personal Internet account on the operator's website and go to the service connection point. In the list, you should find the service of interest and set the parameters for its activation (condition and new number).
In the second case, you need to make sure that there is an amount of thirty rubles on the balance of the number - this is the price for activating call forwarding with the help of a contact center employee.
How to put call forwarding on MTS on your own? If there is no desire to spend money, and a SIM card is available, then just enter the following combination:11140. By sending this request, call forwarding can be activated. And then configure the option. To do this, you will need to dial the request again, but in a different form:service codenumber to which redirection is performed, in the international format. What code to enter?
- 21 - entered for "general" forwarding - to send all incoming calls to another number;
- 67 – indicated to forward calls only if the main number is busy;
- 62 – set if the device is disabled or does not register in the operator's network;
- 61 - is indicated for redirecting calls if there is no answer for some time (you can set the time in the same command, it is enough to enteragain after entering the number, and thenspecify the time interval in seconds, end the command as usual with).
How to remove forwarding to MTS?
To return the standard mode of receiving calls, you should refuse call forwarding. You can do this with a general command to cancel all call forwarding on the number or enter a request that will allow you to disable a specific type of service, for example, if the “no answer” service was activated, etc.
Cancellation of all call forwarding is carried out by request - 002. You can also use the web interface (in your personal account you can also refuse call forwarding), click the appropriate item in the phone menu. In other words, the same methods can be used to disable the service as to activate it.
Conclusion
In this article, we looked at how to redirect to MTS. There are several ways to manage calls. If the subscriber cannot figure out how to set up the service parameters on his own or he is not sure what type of service he needs, he should call 0890. The contact center employees will tell you what kind of redirection should be set, and they will even be able to do it, however, such a service will cost thirty rubles. I don’t want to spend money, but the question “how to enable forwarding to MTS” is still relevant? Then use one of the above methods and set up your own call forwarding. It's not that hard to do.
