Satellite TV is currently not a luxury, but rather a necessity. Such a service is in demand among Russians who live in small towns and villages where there is no alternative option for satellite television. "Tricolor" is a company that is very successful in the field of digital broadcasting. It should be ranked among the nationwide projects, as it provides services at relatively low and affordable prices.
Problems occur
But far from everything is actually smooth and good. Often there are problems with broadcasting and broadcasting channels. The most common of these is the problem with the display signal. Undoubtedly, every owner of a satellite television package has more than once thought about the question of why Tricolor does not show. solve thisnot every user can solve the problem on their own, so you have to contact the technical support service and call the wizard, which is already costly in itself. And yet, this does not prevent satellite television from gaining more and more popularity among users and potential customers every year. This fact, in turn, leads to the search for solutions to a number of problems regarding satellite broadcasting.
Why don't they show the channels?
Reasons why the Tricolor channels are not shown:
- The most common problem causing broadcast problems is environmental influences such as precipitation. This is reflected in the quality characteristics of the receiving signal. Often does not show "Tricolor TV" during the rain. The reason for this is the small diameter of the installed signal receiver. Typically, the cable service provider provides the consumer with antennas that are standard in size. In view of this, due to the numerous features of the terrain, in the presence of adverse weather conditions, the power of a standard signal receiver is not enough for high-quality broadcasting.
- The signal may be distorted or lost due to poor tuning of the signal receiver itself - this will eventually cause the signal to fail or cause distortion of the image. Regardless of how often this problem occurs, it will not be too difficult to solve it. Such a violation of the broadcast can also occur due to damage to the cable (connecting the antenna and the TV).
- Prettya common problem that carries the answer to the question that worries consumers of satellite television services "why Tricolor does not show" is a variety of obstacles that arise on the ground (the presence of trees on the site, neighboring houses or a different nature of construction, etc.). How to solve this problem? First you need to understand the reasons for the violation of the broadcast, and then you need to reinstall your antenna to another place. Perhaps removing visible obstructions.
- Sometimes frost on the antenna can cause interference in signal transmission.
- Do not show free "Tricolor" channels (or all channels) in most cases when carrying out technical work on the satellite itself, in this case it is necessary to wait for their completion.
You should not figure out the satellite TV system on your own with the best of intentions. You can disable already sensitive equipment.
Channels do not show after payment
There is also such a situation - "Tricolor" does not show after payment. What is the reason for the lack of satellite TV broadcast after making a payment, and what to do in such a situation?
- If a number of channels are not being broadcast, then the fact that you need to pay separately for viewing some channels may be a very possible reason for what is happening. In such a situation, you just need to pay extra for the useadditional TV channels and thereby extend their viewing.
- Perhaps the reason why Tricolor stopped showing after payment may be the lack of an access card. To do this, check if the access card is inserted correctly into the receiver.
- As the practice of using satellite television, as well as numerous reviews of consumers of the company's services, shows, the reason why Tricolor does not show after payment, and also the receiver itself is the cause of signal interference or possible failures. To eliminate existing interference, a switch is provided on the rear panel of the receiver. You can try turning the device off and on. It is recommended to wait 5 minutes after turning off the power itself, and then turn it on.
Unfortunately, such cases are not rare when you cannot find out on your own why "Tricolor" does not show. For example, if the numbers "8888" are clearly visible on the receiver's display, or the receiver blinks or does not light up. In this case, you will have to contact the technical support service for repair work on the device. If the screen shows "" - this means that the receiver is set to factory settings and needs to be reconfigured.
After 1 year of using Tricolor TV satellite television services, most viewers stop broadcasting paid packages of “Optimum” or “Maximum HD” TV channels. You are subscribing for the next year, but it still does not show "Tricolor". encodedthe channel (TV package) is still unavailable. It is clear that this is not very pleasant, especially since it is not very easy to get through to technical support, and you are trying to determine what is the reason and whether the payment went through, spending a huge amount of time.
Activate channels
Do not forget that after making the payment, you should activate the TV channels. By logging into the user's personal account, you can place an order for sending activation codes so that broadcasting resumes as soon as possible. If the payment was made successfully (you did not make a mistake when entering the DRE ID number or contract numbers), and "Tricolor TV" does not show, you should turn on your satellite receiver and leave it on on the encrypted channel for about 9 hours.
Do not show free channels "Tricolor"
Since satellite equipment, like television, is being tested, all sorts of breakdowns and malfunctions are not uncommon here. It is about them and how to eliminate them that you will learn by reading the material of this article. We will try to answer all questions and hope that the written information will be useful. Scrolling through a huge number of forums dedicated to the operation of satellite television, you can see a large number of user opinions, which, first of all, express the hope that the quality of satellite broadcasting will become much better over time. And these people are right.
Suffice it to recall that many years have passed since the invention of telecommunications, and at the initialAt the stage of television formation, there were a number of problems, the appearance of which today can be avoided due to the fact that modern specialists have certain experience and knowledge regarding the operation of telecommunications. Due to the fact that broadcasting occurs from a satellite that revolves around our planet, there is an impact of outer space. In other words, due to the vulnerability of the satellite, TV malfunctions may occur.
One of the significant problems associated with the operation of satellite television is that they do not show free Tricolor channels. This is a very common problem that occurs quite often. What to do in this situation? Here you can not do without reconfiguring the receiver and restarting it.
To do this, it is recommended to leave the receiver turned on on the TV channel "Russia 1". This is a prerequisite that must be met in order to restart the encoded Tricolor TV channels. After a short time period (equal to about 9 hours), the free channels available on your Tricolor TV receiver open. If this does not happen, you can reconfigure your equipment to digital broadcasting mode and enjoy watching TV programs in digital resolution.
Advice: in no case do not lose the Tricolor TV subscription agreement and be sure to save the DRE ID number.
If "No signal" appears on the display screen, try updating the channel list. Quite often this helps.
No signal
The most frequent question that is asked to the technical support service of subscribers is: "Tricolor TV does not show today. What should I do?" Let's try to answer this question.
Does not show "Tricolor": "No signal". It is necessary to determine where this message is being issued from: from a satellite receiver or from a TV. The best way to quickly determine this aspect is to work with the remote control of the satellite receiver. For example, when you press the "OK" key, the receiver should immediately respond. A list of Tricolor TV channels or an inscription about their absence will appear on the TV screen. In this situation, there may be several reasons for the appearance of the message "No signal".
- does not show "Tricolor TV" in such a situation if a satellite dish with a small diameter has been installed;
– there is a failure of the satellite dish settings due to strong gusts of wind or a snowstorm, in this case, you cannot do without the help of a technical support specialist;
– channels are broadcast selectively, there may have been changes in broadcast frequencies.
Does not show Tricolor, what should I do?
If there is no broadcast of TV channels on satellite television "Tricolor" after all the steps described above, you should reconfigure the existing TV channels. To do this, use the remote control to enter the menu of the receiver andsearch for channels. Then you need to press the appropriate key and scan satellite TV for channels.
In addition, a number of other reasons should be listed that can cause interference or lack of broadcasting of Tricolor satellite television. Depending on the existing malfunctions, they can be eliminated either independently or with the help of qualified specialists. However, before you begin to deal with satellite broadcasting, try to pay due attention to the data entered when activating a subscription. The fact is that satellite television is based on a subscription system, and incorrectly entered data can cause a lack of broadcasting.
Other reasons
So what could be the problem?
The first reason. The presence of a malfunction of the satellite converter itself. In order to troubleshoot, you should replace the hardware.
Second reason. Breakage of the coaxial cable connecting the satellite dish and the receiver. The equipment does not respond to pressing "OK". In this situation, it should be assumed that the notification of interference in the broadcast or the absence of the signal itself is carried out by your television equipment. Signal problems may be caused by using the wrong jack on the TV to which the satellite receiver should be connected. Connection is usually made using the RCA, Scart or HDMI inputs. On the remote control of the TV equipment, you needfind the "Source" button, with which the television equipment is activated. By pressing the button, you need to switch to the input you need.
The third reason that the Tricolor channels do not show. If you are using a GS 8306 receiver, a common problem will be the random nature of switching the outputs of the TV equipment, carried out by the "Input signal" key located in the upper left area on the remote control. You can see the active output of the receiver using the indication: if the top indicator lights up (the indicator is located on the left of the front panel), then RCA is used, the lower part of the indicator lights up - the HDMI output is active.
The fourth reason. There is an inscription on the display of television equipment: "coded DRE channel" or "no access". It is necessary to determine the state of the Tricolor TV subscription (it must be active). You can check the status:
- through your satellite TV account;
- on the official website of the TV company, you need to go to the "subscribers" section (by entering the ID number of the satellite receiver) and see the subscription expiration date.
In a situation where the "Tricolor TV"-subscription is in an active state, then make sure that the smart card is visible to your receiver and that the ID number of your satellite receiver is determined. To do this, go to the equipment menu, open the "Status" section.
- If yoursatellite TV equipment with a smart card, unplug the receiver from the power supply, remove the card, make sure it is inserted correctly.
- If your device works without a smart card (all MPEG2 receivers, GS 8300, GS 8300M), then there is a problem with the built-in module. Such equipment should be repaired. The receiver is able to determine the ID number. Reset the TV equipment settings, after the reboot, restart the standard settings wizard, click on the channel search.
Tricolor TV-Siberia
"Tricolor TV-Siberia" is almost the same package of satellite TV services as the usual "Tricolor TV". The difference is that the activities of TV-Siberia are focused on the eastern part of Russia. The main difference of this package is that it includes some local channels. Therefore, if a question arose about why "Tricolor-Siberia" does not show, the answer to it can be found in this article a little higher.
Conclusion
So, from all of the above, we can conclude that satellite television is a significant step in the field of television broadcasting. However, it does not always show ideally due to its sensitivity to environmental influences. But this does not reduce the popularity of this type of television, but, on the contrary, arouses interest among potential consumers of entertainment services. Perhaps there were problems with broadcasting in the post-Soviet era. Right now it's just a minor glitch.
Definitely, in many ways these problems are the fault of both the manufacturers of equipment for satellite broadcasting and the workers themselves who carry out maintenance of the hardware. Since satellite television is a relatively new way of transmitting a signal, there are a number of shortcomings that require qualified personnel to eliminate. However, at present, it is not possible to solve this problem due to the fact that our education is based on the old system of knowledge delivery. Thus, specialists who really understand how to set up satellite television communications can be counted on one hand.
It is for this reason that the annoying question arises as to why "Tricolor" does not show. However, this does not stop those wishing to improve the quality of the image by receiving transmissions from the satellite. A special place in the field of satellite broadcasting services should be given to the company "Tricolor", which for several years of work has generally proven itself well and gained credibility with most users.
The main thing is patience
It also happens that when broadcasting from the Tricolor TV satellite, a number of problems arise, which raise the question of why Tricolor TV does not show. Channels may not work for any reason. In addition, failures happen in any complex system, and you need to come to terms with this. In no case do not make scandals, but try to explain the problem, and then they will be able to help you promptly. well andif it was not possible to get through to technical support, you can find many questions and answers in this article! Good luck in solving your problems with satellite TV!
