Satellite TV Tricolor has long been popular among a large number of viewers - and all thanks to the large number of channels and broadcast quality. But even with the latest technology, there can be such a nuisance as a lack of signal.
What to do if the inscription on the Tricolor "No signal" appeared only on a few channels, while the rest show
If the signal is lost only on a few channels, you will need to update their list. For this you will need:
- Disconnect the receiver from the power supply for about a minute, then plug it in and wait until the receiver is back in working condition, and then switch it to the encrypted channel.
- In the event that there is no signal on Tricolor-TV again, search for channels, which can be done using the remote control for the receiver. Enter the menu, then search for Tricolor-TV channels, then press OK, then the yellow button "Done" and finally "Exit". Then the channel search will start. During the search, two buttons will be displayed on the screen - "All Radio" and "All TV". At the end of the search, a window will appear with the number of TV channels found.
Requiredsave the found TV channels. To do this, click the "OK" button. After that, the receiver should turn on the Tricolor-TV.
What to do if the inscription on the Tricolor "No signal" is displayed on all television channels
If the signal disappeared on all TV channels, this indicates its low level. Then you will need to check the connection between the cable and the receiver, its reliability and the integrity of the connections at the connectors.
If the connection is still correct and there are no damages on the cable, and there is no signal on the Tricolor, then the antenna will need to be tuned manually. To do this, it is best to contact a regional dealer to call a master at home.
To adjust the antenna yourself, you need to move the antenna very slowly, one centimeter, fixing it for 5 seconds in each position until an image appears on Tricolor-TV. The strength and quality of the signal can be checked using the information banner located on this TV channel by pressing the "i" button twice. In this case, the signal and quality scale will be displayed at the bottom of the screen (quality on the right and strength on the left). To view Tricolor-TV channels, these two scales must be filled at least 70%, only in this case the viewing will be stable.
What to do if the inscription on the Tricolor "No signal" is displayed further
In most cases, the procedure described above helps, but sometimes you have to resort to more drastic measures that require a factory resetreceiver. To do this, turn on the receiver. On the remote, after pressing the "Menu" button, the entire menu of the receiver will be displayed.
Using the "Down" and "Up" arrows located on the remote control, you need to go to the "Installation" item. Then, to enter the submenu, press the "OK" button and enter the required PIN: 0000.
In the next submenu that opens, select "Factory settings" using the arrows and click "OK". Then press the "F1" button and confirm the reset of the existing settings, then wait a minute until the process ends.
The "Next" button will appear in the settings wizard. Press “OK” again, and repeat this in each window that appears, without changing the value, until “Search for Tricolor-TV channels” appears.
After the automatic search is completed, the number of detected Radio and TV channels will be displayed. And the "Finish" button will be available for pressing. Press the "F3" button, which will save you all the channels found. Enjoy high quality TV!
In this article, you learned what to do if the message "no signal" appears. Tricolor-TV will now give you only one pleasure, because you can watch the most interesting TV shows.
