In our country, installation and configuration of a satellite dish is often required, as this type of television is gaining momentum every year and becoming more and more popular. Usually specialized companies are engaged in this business, but installation can be done by hand. Assembly of equipment is carried out according to the instructions, without causing any particular difficulties. Care must be taken with the antenna mirror, made of aluminum. After assembly work, make sure that all fasteners are secure. Especially if you are setting up a satellite dish yourself. In no case should you neglect the installation of a satellite convector, because the quality of reception will depend on it.
To ensure that setting up satellite dishes does not turn into real torture, installation is recommended to be carried out in easily accessible places. If you plan to place it outside the window, then you can drill a hole for the cable in the corner of the window frame. When located on the roof, low-voltage risers of the house are more often used. You can also cableskip the front of the building. The diameter of the holes should be slightly larger than the thickness of the wire, otherwise the outer sheath may be damaged. At the last stage, work is being done to seal the holes.
It is interesting to set up satellite dishes with a shifted focus, which have an oval shape. Such devices allow you to install several converters for receiving a television signal and receive several satellites at once. The fixing nuts should not be fully tightened, because the antenna will have to be directed in different directions. First, the central satellite is found and connected to the first input. Then, in the same way, are the rest. In fact, the order of connecting converters does not really matter. It is only necessary that the actual connection matches the set satellites in the menu.
Classic tuning of satellite dishes is carried out taking into account the position of the sun. Usually at one in the afternoon a “plate” is sent to it, while the time zone and season should be taken into account. Then it turns very smoothly until a confident signal reception is found. If there is no signal, it is recommended to lower or raise the antenna. And in the same way continue to look for sustainable momentum. After a successful search, all fasteners are fully tightened. After a while, the receiver will automatically search for all TV channels.
Thus, it is safe to say that the alignment of satellite dishes is notrepresents nothing supernatural. With the right approach, you can save a significant amount by setting up the equipment yourself. However, without careful study of the instructions can not do. Using the recommendations of experts, you can watch your favorite TV shows and movies in an hour. The installation work can be considered completed when all channels designed for a given antenna diameter have appeared in the satellite tuner.
