Today, there are many manufacturers on the world market that are engaged in automation. It needs to be programmed correctly so that the necessary technologies work well and properly.
Now we will look at the gate remotes. If you fine-tune them, then you will protect yourself from intruders and make your life much more comfortable. You can also use the key fob not only to open the gate, but also for other devices. Let's see how to program the gate remote.
CAME consoles
This company is a leader in the production of universal remotes. They withstand various climatic conditions and are easy to program.
TOP-432NA
CAME today is considered the highest quality and most reliable. You can find a lot of good remotes from her. According to consumers, the highest quality model is TOP-432NA. What is it connected with? This remote control is dual-channel, which allows you to work with several devices at once, namely, there arethe ability to open several devices at once, for example, gates and barriers. Its frequency is 433.92 MHz. This model is able to work at a fairly large distance - 140 meters. How to program the CAME gate remote control?
- At the first stage, you need to bring the remote control close to the gate.
- Next, you need to press 2 buttons. Hold them until the indicator light starts flashing.
- After that, press any button, you just need to choose which one will be used for the gate. If the indicator starts to burn steadily and stops blinking, then you did everything right.
- We take the old remote that came with the gate and press the button to overwrite the code. It should be remembered that everything must be done quickly while the light on the CAME remote control is on.
- When the indicator on the new remote control blinks several times, the overwriting will end. Now you can use it to work with the gate.
Four-channel TOP-434NA
This remote is similar to the first model. The only difference is the size and number of fixtures that can be programmed. The frequency stays the same. TOP-434NA - gate remote control. How to program it?
- As in the first case, you need to bring the remote control to the gate and press two keys simultaneously. We are waiting until the LED starts to glow.
- Press one of the buttons to start recording on it.
- Next, press the button on the special remote control to rewrite the code.
- After the indicator blinks 3 times, you can start using this remote control. Dataoverwritten successfully.
TOP-432EE
Recently, a new keychain from the TOP series has appeared - TOP-432EE. It can allow you to work with devices that have been programmed with different encodings, such as TAM and TOP. To get started with this remote:
- It is necessary to press the key on the new key fob that you want to use to work with the gate in the future. We wait until the indicator blinks, and release the button.
- Repeat pressing this button.
- After the completed actions, you need to quickly bring the old remote control to the TOP-432EE. We press the key on it, which allows you to open the gate. When the LED blinks 3 times, you can start using the device for its intended purpose.
TOP-432EV
This remote control is considered an improved version of the previous model. It is quite small in size, which allows you to carry it in your pocket. Also TOP-432EV can contain 4096 code operations. How to program this key fob?
- As before, hold down the two keys until you see the light bulb blinking. Then release them and move on to the next step.
- Select the button to which the data will be moved.
- Wait a few seconds until the LED stays on.
- Bring the new remote control to the bottom of the other key fob and wait for the overwrite to complete. This usually takes about 10-20 seconds. When the LED blinks 3 times, you can be sure that the recording has completed successfully.
Came Twin
Another novelty is the Came Twin keychain. He has onefeature - code protection. Outsiders will not be able to easily get hold of the code to open your gate. They are also available in various variations - for two and four buttons. Came Twin is able to work with dynamic code. How to program the gate remote control?
- First, you need to make sure that this key fob is already usable and has a button to receive the signal.
- Bring the remote as close as possible to the receiver.
- Next, take the old key fob and press the key where the required code is written. We are waiting until the LED is on.
- After 10 seconds, press the key located on the old remote control.
- In about 20 seconds, the code writing process will end.
Nice Company
The Italian company Nice is in the top in the production of automated systems for various equipment. Their products are of high quality and reliable. Of course, they have universal remotes that allow you to control some processes at the same time. How to program Nice gate remote controls?
Nice FLO and FLOR
Key fobs from Nice are pretty easy to program. All models of the FLO and FLOR range can work with rolling code at a frequency of 433.92 MHz. They can work even if they are at a distance of 140 meters from the required object. Remotes are available with one, two or four keys. Let's take an example of how to program the Nice FLO2R gate remote control.
- First go to the receiver.
- It is necessary to arrange the consoles in series.
- Next, select the key to write the code and click on it.
- After 5 seconds, you can press the button that is used to open the gate on the old remote control.
- It remains only to repeat the keystroke on the first remote control. Button programming completed.
Hormann
This is a German company that focuses on quality. Her products are quite reliable and beautiful. The manufacturer paints different buttons in different colors to identify certain frequencies for them (blue - 868 MHz, green - 26.975 MHz, gray - 40 MHz).
Hormann HSM 4
This model is equipped with four buttons that allow you to control various equipment. Hormann HSM 4 has a frequency of 868 MHz and the ability to use dynamic code. You can also note the rather small size of the keychain. How to program Hormann HSM 4 gate remote control?
- Placing the new remote close to the old one.
- After that, you must press the key with which the reading will be performed. Wait until the light comes on.
- Next, you need to press the key that you need to use in the future. After 5 seconds, the LED will flash rapidly. Code transfer complete.
Hormann HSE2 and HSM
HSE2 has 2-channel operation, while HSM has 2-channel and 4-channel modes. It has a small size, which allows you to cling it to the keys. The first model operates at a frequency of 868 MHz, and the second -40, 680 MHz. To program them:
- First you need to place the remotes close to each other.
- We take the old key fob and press the key from which you want to read the data.
- Next, press the key you choose to use in the new remote control.
- It remains only to wait for the LED to blink. Let's release the keys and we can start using this remote control.
Doorhan
Doorhan is a Russian company. It has long entered the world market and supplies high-quality equipment for automating work with gates and radios.
Doorhan Transmitter 2, Transmitter 4
These models work with a dynamic code at a frequency of 433 MHz. As you may have noticed from the name, key fobs can work with 2 or 4 different devices. How to program the doorhan gate remote control?
- First you need to delete the old entries. To do this, press the key with which you can record, and wait. After 15 seconds everything will be deleted.
- Next, you need to press the SW1 button (or any other that needs to be programmed) and on the old key fob to record data. Wait a few seconds.
- This entry is over. You can start using.
BFT Company
The most common remotes from this company are BFT Mitto 2-12, BFT Mitto 4-12. They are two and four channel, respectively. Able to operate at a frequency of 433.92 MHz. How to program a BFT gate remote control?
- To transfer data, press the OK key.
- Next, go to the PARAMETER item and press the "-" button a couple of times.
- Repeat clicking on OK. After that, you will find yourself in a menu where you can add a device.
- Press the AD start key and click on the required button.
- Next, press the corresponding key in the old key fob and wait for the data to be overwritten.
Faac
This is a fairly popular Italian company. Its products are used in many countries around the world.
Faac XT2-868 SLH and XT4-868 SLH
These models are used to control two or four appliances. The XT2-868 SLH and XT4-868 SLH operate at 868 and 35 MHz, respectively. They can also be used in various climatic conditions. How to program Faac gate remote control?
- First, you must simultaneously press the buttons P1 and P2 to program the key fob.
- Next, you need to place the remotes together.
- As soon as the LED starts to burn, you need to hold down the key on the old device, which will be used in the recording.
- In the new remote control, select the Slave button. After 15 seconds, the recording will end. Then you can start using this remote control.
Conclusion
Today you can program these remotes for many devices. How to program the gate remote control? As you can see, this is quite easy to do. InMany remotes have very similar actions. For everything to be successful, follow the instructions. You can choose the remote control of any company that you like best. Of course, you should choose the right frequency. This will be an important parameter when choosing a remote control.
