Today satellite digital television Tricolor TV has become very popular. In order to save on the total cost of Tricolor TV, setup and installation can be done by yourself.
In order to start installing, assembling and tuning this antenna, you need to have on hand: a wrench, a drill, a pencil, a Phillips screwdriver, a compass and a protractor. First of all, screw the support onto the transponder bracket. Pull the cable from the antenna into the house and connect it to the LNB IN jack. Then, according to the instructions, prepare the antenna cable. Connect the satellite receiver and cable to the TV.
Now start orienting the antenna by pointing the dish at the satellite. Once you turn on the receiver, it will be in setup mode. In Tricolor TV, the setting starts from the moment two bars appear at the bottom of the screen. In satellite television Tricolor TV, the channel setting will depend on the quality and strength of the signals.
Now you should focus on the azimuth and calculated angles, which are indicated ininstructions and refer to your city, they are available in the table. It is possible to orient to the satellite and tilt the dish using the neighbor's satellite dish. Using a compass, you should measure the azimuth or remember the degree of direction of your satellite dish in this azimuth.
Correct Tricolor TV setting will give a green strip in the receiver. If this strip is not there, then put an assistant on the TV who will correct your actions, or install a mirror into which you can look by adjusting the antenna. It is enough if the signal is within 70%.
Fine Tricolor TV tuning will start as soon as the receiver is turned on. At this point, you will be prompted to download an update to the Tricolor TV channel list. After that, you need to register your receiver by entering your passport details, home address, serial number of the receiver and the secret code from the card.
It is better to do this on a special Tricolor TV website. Write all data without abbreviations. As soon as the registration is completed, you will be informed of the contract number, and you can activate the card.
Now let's take a closer look at how the channel setup is carried out in Tricolor TV.
Once you enter the "Menu", select the "Search Channels" button. On the warning screen, select "Yes" and click "OK". At this point, the process of searching for the desired programs will start, and you will need to save them. Click "Yes" and "OK" again. After that, the configuration of the programs that are included in the package will begin.satellite TV.
Now proceed to the next step, as a result of which the installation of additional channels will instantly occur in Tricolor TV. To do this, select "Settings" from the menu and press "OK". A window will immediately appear in which you need to enter your secret password: "0000" - press this button 0 four times. Then select "Manual Search" and click "OK". In the "Frequency" item, place the cursor and activate the value "12111", click "OK". Start by clicking the "Start Search" item, confirm with the "OK" button.
New generation receivers should have over 100 channels.
