It's undeniable that home cleaning appliances are improving every year. About 30 years ago, an alternative to a broom was only a bulky bag vacuum cleaner. And now in the store you can buy models with a container, with an aquafilter, washing and even compact robots that clean a given area themselves. Water vacuum cleaners are especially fond of Russian buyers. According to the owners, the air after cleaning with such a device is much cleaner and fresher, because even the smallest dust is retained in the container.
The main disadvantage of such models is the high price. Not every average family can afford to spend 15-20 thousand rubles. on a household cleaner. Therefore, among the entire line of vacuum cleaners with an aquafilter, Vitek brand products compare favorably with price and quality.
Let's consider one of the most popular models - VT-1886 B.
Design and principle of operation
The Vitek VT-1886 B vacuum cleaner is a model with an aquafilter, that is, debris and coarse dust in it, passing through a container with water, remain at the bottom, and the purified air returns to the room.
Description
There are two wide buttons on the case -turning on and winding the cord. They are large enough so that the hostess can press them with her foot without bending over during cleaning. Between the buttons is the power control knob, which allows you to reduce the suction power. It is necessary in cases where you have to clean delicate surfaces from dust, such as curtains. If you do not use it, the thin fabric will have to be pulled out of the brush, risking staining or even tearing.
A little further than the buttons is a wide plastic handle. It is wide enough and strong enough to carry the vacuum cleaner from place to place.
The container with the aquafilter is installed in the body of the vacuum cleaner and fixed on it with a latch. The tank is made of opaque plastic, which allows you to see the fill level. To remove it, you must press the button of the transfer handle and pull up. To pour water into the container, unsnap the clips and pull the lid with the filter system attached to it.
Nozzles
Vitek vacuum cleaner is equipped with five nozzles:
- Brush for cleaning. This is a standard wide nozzle with a floor/carpet switch. The push of a button extends the bristles to prevent scratches on smooth surfaces (laminate or parquet).
- Turbo brush. This nozzle can be usedfor both floor cleaning and carpet cleaning. The bristle, fixed in a spiral on a cylindrical rod, winds animal hair and long hair around itself, rotating during operation under the influence of air flow. The turbo brush has a number of limitations in operation. In particular, the nozzle must not be used on carpets with long pile (more than 15 mm) or brushed over electrical wires.
- Small brush. It has a long soft bristle and is ideal for cleaning furniture, smooth, polished surfaces.
- Crevice nozzle. Long and thin, it is designed for spot cleaning of hard-to-reach places, such as baseboards or joints of upholstered furniture.
- Nozzle for upholstered furniture. This is a small, lint-free brush designed for cleaning upholstery.
When switching, the pile is removed, and the nozzle fits snugly on the surface. In this position, it is ideal for cleaning carpets or rugs.
Other accessories
These include a corrugated flexible hose with a handle and an extension tube. The tip of the sleeve is inserted into the air intake hole until it clicks, and is disconnected by pressing the buttons of the latches. The extension tube allows you to vacuum the floor without bending down, and the corners without stretching out or standing on tiptoe. It is telescopic (that is, retractable, not composite) and can be extended to the required distance. The tube is equipped with a holder for nozzles - plastic fasteners, on which furniture and small brushes can be fixed. In this position, they will not get lost and will always be at hand.
Filters
Vitek vacuum cleaner is equipped not only with water, but also with a number of additional fine filters. These include cyclonic, 2 foam, anti-foam and HEPA. The latter is the output filter. It traps the smallest particles of dust that penetrate the water with air bubbles. The HEPA filter is washable and does not require regular replacement. If the owner plans to vacuum carpets that have been previously treated with cleaning shampoo, the manufacturer recommends adding a defoamer to the water.
Caring for your vacuum cleaner
After each cleaning, it is necessary to empty the water from the container to avoid the appearance of an unpleasant odor. After that, the tank must be rinsed and wiped dry. The cyclonic, foam and foam filters should also be rinsed with water and dried after each cleaning.
Before work, no more than 500 ml of water is poured into the tank. Overflow is not allowed. Too much water can enter the motor and cause a short circuit.
HEPA filter is washed as it becomes dirty, depending on the frequency of use. To clean it, it must be placed under running water and rinsed. Brushes, sponges and detergents must not be used. Drying the HEPA filter is also necessary in a natural way, without using heating devices. The foam filter in front of it is cleaned in the same way.
The housing of the "Vitek" vacuum cleaner is cleaned first with a soft, damp cloth, and then wiped dry. Do not wash it with abrasive detergents or immerse it in water.
Reviews
The low price and high quality is what makes the Vitek vacuum cleaner so attractive to buyers. Owner reviews say that over the years this technique has proven itself perfectly. However, it is not without criticism.
First of all, they relate to the weight of the unit. Vacuum cleaners with a water filter are quite massive and heavy, especially if there is water in the container.
Therefore, despite the large wheels, this model is hard to roll over the threshold or drag from room to room. However, this problem is typical for all units with a water filter.
Another feature of these models is that they require special care. Filters should be washed regularly and the container should be emptied and dried after each cleaning. Accordingly, it will take additional time to disassemble the Vitek vacuum cleaner and then dry it. And the bag vacuum cleaner can simply be pushed into the corner after work.
Among the advantages of this model, owners note good suction power, no smell of dust after cleaning, a large number of nozzles included in the kit for different types of coatings.
Instructions
It includes a description of the components and the principle of assembling various components. The authors paid special attention to the description of the precautions with which the Vitek vacuum cleaner should be operated. The instruction prohibits using the unit without water, with uninstalled or incorrectly installed filters, turning it over during operation. Manufacturers do not recommend vacuuming fine dust, flammable liquids, cigarette butts, matches, cigarettes andcollect water with it. This document also describes in detail which filters need to be washed in what way.
Often the owners violate the instructions when they carry the Vitek vacuum cleaner. The photo of the model allows you to see that there are 2 handles on the case. For one it is necessary to lift the vacuum cleaner. For the other - only a container. The handle of the tank is not designed for the weight of the entire unit, so it may not withstand lifting and break.
Repair
Sometimes owners are faced with breakdowns of this vacuum cleaner. The most common complaint is that the suction power drops during cleaning, the equipment gets very hot. As a rule, repair of the Vitek vacuum cleaner is not required in this case. Such a malfunction may be associated with severe contamination of the filters.
In this case, they must be washed as described in the instructions. A drop in power may be due to a leak: the water container is not installed correctly, its lid is not tightly closed, the hose or the rubber seal is torn. To determine the place of air leakage, it is enough to run your hand along the body and correct violations depending on their nature.
It is much more difficult when the equipment does not turn on at all. In this case, the Vitek vacuum cleaner can be repaired at a service center or independently by disassembling it with a screwdriver. Pay special attention to the buttons. The fact is that they are attached to the body with latches that can be broken if you squeeze them inaccurately.
Vacuum cleaner warrantyis 12 months. And the service life, like all similar household appliances for the home, is 5 years.
