Bluetooth receivers are equipped with PAC audio outputs. The list of reproducible frequencies depends on the manufacturer. Transmitters are typically used with diode expanders. Their range is on average 80 meters. The overload indicator of the receivers is at around 40 A. The voltage is transmitted to the device through compact adapters.
Models are very sensitive to high humidity, and this must be taken into account when using receivers. The intermediate frequency indicator averages 500 MHz. Also important parameters of devices include the modulation coefficient, which is measured as a percentage. To understand this issue in detail, you must first determine the functions of the devices.
Device Assignment
Wireless receivers are designed to transmit audio. This process is carried out by data modulation. Adapters for models can be used with protection. Many devices are compatible with smartphone operating systems. Modifications with PA output are suitable for music centers.
Also, wireless receivers are used to connectprefixes. Many modifications are made with coded capacitors. Such models are not afraid of frequency interference and cope well with the overloads that occur on the channels. Only devices with dipole adapters are suitable for connecting satellite dishes. As a rule, they use a built-in module.
Logitech K10 receiver specifications
This Bluetooth wireless receiver is great for connecting second generation set-top boxes. If you believe the buyers, then failures in the operation of the adapter are quite rare. The frequency interference protection system is applied to the third class. There is no CA video output in this case. If necessary, the specified receiver can be flashed.
The frequency of the model is 500 MHz. Sensitivity at low load is quite high. The antenna of the modification is of the built-in type. It is also important to note that the model has a very compact size. The receiver is produced mainly in black. The audio output of the KKR in this case is available. Thus, the model copes with high frequencies remarkably.
A diode type expander is used to transmit the signal to the connector. The model does not have a display system. The presence of the P20 audio output deserves special attention in the receiver. It is allowed to store the model at a temperature not exceeding 50 degrees. The indicated bluetooth receiver costs only 5800 rubles in stores
Grand-X Model BT45G
Melon av-The receiver with bluetooth is great for connecting satellite dishes. If you believe the buyers, then the device works without failures. The transmitter of the modification is used with contact expanders. Sinusoidal interference is not terrible for this device. Harmonic oscillations from commutators are also rare. The intermediate frequency indicator is at around 340 MHz.
The device is not suitable for first generation consoles. It is also worth noting that the model is produced without a built-in antenna. The receiver must not be used at high humidity. The maximum transmission distance is 80 meters. The demodulation coefficient is at around 75%. The receiver overload parameter is no more than 40 A. In this case, there is no audio output of the RK. The price for the specified bluetooth receiver starts from 4800 rubles.
Features of Grand-X BT53G
This bluetooth transmitter is great for set-top boxes and music centers. Many praise it for its compatibility with the Android system. It is also worth noting that the expander of the modification is of a collector type, and protection against sinusoidal interference is provided in this case. Video output of the PCA model, unfortunately, is missing. The receiver's voltage limit is 5.5 V. The model is capable of transmitting data over a distance of 80 meters.
The antenna is used by the manufacturer of the retractable type. When transmitting a video signal, the capacitor reacts very quickly, with an average response time of 1 ms. At a frequency of 300 Hz, the model behaves stably, and the harmonicsfluctuations are practically absent. When buying a model, it is important to consider that CAC formats are not supported by the device. It is not suitable for connecting switches. The price of this bluetooth receiver in stores starts from 7 thousand rubles.
Characteristics of Cliptec CL-BLU-ZB626 receivers
This is an inexpensive and multifunctional bluetooth transmitter. Buyers praise him for his quick response and the presence of the port of the Republic of Kazakhstan. The device supports the PAC format without any problems. The system of protection against harmonic oscillations is applied to the third class. The device transmits data over a distance of no more than 100 meters.
The body of the receiver is made compact. In hot weather, it is better not to use the device. The intermediate frequency of modification is 600 MHz. There is an av-receiver with bluetooth in specialized stores from 5 thousand rubles.
Customer opinions about Sony C30101 models
This model has the following parameters: intermediate frequency 340 MHz, overload 30 A, operating humidity 30%. If you believe the buyers, then the receiver can be used with a connector. The sinusoidal interference protection system is applied to the third class. In this case, the built-in antenna is used. The expander of the modification is used with two contacts. The device supports low frequency channels without problems. The demodulation ratio is at 80%.
The range of the receiver of this series is not very high. However, it is important to note that it has a high-quality adapter with a capacitor. The conductivity of the diode is at least 5 microns. Problems with the RK format should not arise. ATstores, the user is able to buy this receiver for 5800 rubles.
Features of Belkin devices
This receiver is well suited for music centers with PP output. If you believe the experts, then the adapter for it is selected quite high quality. The expander in the device uses a single-channel type. There is no PAC output in this case. It is also worth noting that the model has a high sensitivity parameter. The receiver overload rating is only 30A.
There is no protection system against magnetic fluctuations in this case. The voltage of the block is no more than 5.4 V. The modification copes well with overloads from the adapter. The bluetooth music receiver of this series costs about 5700 rubles.
Yamaha 1010 receiver specifications
This speaker bluetooth receiver is famous for its high quality capacitor. If you believe the buyers, then the model is allowed to connect to the consoles. The data transmission distance is no more than 80 meters. The antenna of the modification is of the built-in type, and it is installed in the upper part of the structure. The intermediate frequency of the device is 520 MHz.
The magnetic vibration protection system is applied to the third class. The modification has only one PAC audio output. Connecting wired connectors to the model is allowed. However, it is important to note that the case of the device does not tolerate high humidity. The demodulation coefficient is no more than 90%. In this case, there is a video output of the KA. Price for thisbluetooth music receiver fluctuates around 7700 rubles.
Customers' opinions about Gemix BT-12 models
This bluetooth receiver (audio bridge) for set-top boxes is in great demand. First of all, it is important to mention the high sensitivity of the device. The receiver has a RC output. The device copes well with magnetic vibrations. However, there are also disadvantages. The throughput of the receiver is significantly underestimated. The device is not suitable for first generation consoles.
If you believe the reviews of experts, then the model supports the RCC format. The overload indicator of the equipment is at around 33 A. The harmonic interference protection system will be applied in the third class. Android smartphones are supported by this model. However, it is important to note that the manufacturer does not provide compatibility with the KP20 format. When transmitting multi-stream data, there are long delays. The model is also not cheap, and in the store it is sold for 8200 rubles.
Features of Gemix BT-30 devices
This Bluetooth headphone receiver has many advantages. Buyers praise the device for its simplicity. This modification supports the standard functions of the adapter. The RA output is used to connect the music center.
It is also worth noting that the model supports the P30 format. With harmonic oscillations, problems are quite rare. The device cannot be used to connect set-top boxes. The magnetic vibration protection system is applied to the third class. The intermediate frequency of modification isat around 380 MHz. If you trust the reviews of experts, then the modulation process does not take much time from this receiver. Transients in the expander do not take much time, and the response rate is no more than 4 ms.
PK40 format model supports. Connectors can be connected in various types. Separately, it is important to mention a high-quality retractable type antenna that copes well with signal reception. The modification capacitor is of the dipole type. The price for the specified device in shops starts from 6400 rubles.
BM10 receiver specifications
The Bluetooth receiver BM10 has the following performance: nominal voltage 3.5A, demodulation ratio 68%, input sensitivity is 10mV. Overloads in the device are allowed up to 20 A. The receiver does not have a system of protection against harmonic oscillations. Separately, it is important to note that the model has a dipole-type adapter.
The expander for it is selected with two filters. Thus, the range in the device is high, and is as much as 120 meters. The body of the receiver is made of plastic. The antenna of the modification is of the built-in type. The intermediate frequency of the device is 380 MHz. The RA output in this case is supported by the equipment. There are receivers in the markets for about 8800 rubles.
