In the instructions for setting the watch "AMST 3003" it is indicated that the device is equipped with a Japanese Miyota movement, which is distinguished by its high strength, moisture resistance, wide functionality and excellent appearance. Such an accessory perfectly emphasizes the status of the owner.
Description
Instructions for setting the watch "AMST 3003" states that the strength of the product is ensured by the quality materials used in the manufacture. The case part is made of strong stainless steel which maintains considerable mechanical loadings. Scratch-proof mineral glass is not subject to scratches, protects from dust and moisture. Depending on the modification, the element is able to withstand pressure from 3 to 10 atmospheres.
The model under consideration is equipped with wide additional functionality, including the following options:
- Calendar.
- Alarm clock.
- LED backlight.
- Luminous luminescent hands.
- Stopwatch.
Each set comes with instructions for setting the clock "AMST 3003", allowing you to make the most of the optionsaccessory, as well as to avoid violations during operation.
Care and wearing
The manufacturer recommends using dry or slightly damp soft-type wipes to clean the glass and body. It is acceptable to use neutral detergents that do not contain abrasives and solvents. It is necessary to exclude glue, oil and alcohol solutions, paint, varnish, alkalis, acids from getting on the watch. To increase the life of the belt, you should protect it from excessive moisture, dry air, frequent temperature changes, contact with aggressive chemical components.
Instructions for the use of watches "AMST 3003" provides a number of measures to extend the life of the product. These include:
- Protection from prolonged exposure to sunlight.
- Exclusion of mechanical impacts, including shocks and falls.
- Do not expose your watch to extremely low or high temperatures.
- Keep the product in a dry place.
- When worn, the strap should not be tight around the wrist, leaving a noticeable mark.
Watch "AMST 3003": instructions
The instrument is set up to replace the batteries from time to time. The lag of the hands of the clock indicates malnutrition. Don't be surprised if this happens shortly after purchasing the accessory. The fact is that the manufacturer completes the products with test batteries. To replace the battery, you will need to open the back cover of the case. This job is bettertrust a professional.
The user manual for the watch in question indicates the degree of water resistance. Below are these values:
- Three-atmosphere model withstands moisture from handwashing or rain.
- Five "atmospheres" of water resistance allow you to swim and dive to shallow depths.
- 10 "atmospheres" give the ability to dive under water to a limit that does not exceed the same indicator.
- The metal used to create the product will not corrode, oxidize or rust.
Time setting
The text of the instructions for setting the clock "AMST 3003" states that the exact time should be set using the buttons located on the sides of the case. Manipulations are carried out in the following order:
- To enter the "menu" for setting the time, you need to press the button three times, which is located at the bottom left side.
- The choice of minutes is made by a single press of the key located at the bottom right side of the case.
- Correction of minutes is performed using the upper right button.
- Then activate the lower right button again to select hours.
- The final time format is set by fixing the upper right button.
In this watch, both 12- and 24-hour modes are available. Its selection is made using the lower left button.
Date and days of the week
The instruction for setting the clock "AMST 3003" assumes the followingdate setting manipulations:
- Perform three clicks on the lower left button, after which the same number of times press the key located at the bottom right. The date should now flash on the screen.
- The number is adjusted with the upper right button.
- Press the bottom right key.
- Set the desired month using the top slider on the right.
- Activating the bottom left button returns the watch to its current operating mode.
- You can view the date by pressing and holding the button located at the top right.
The current day of the week, according to the instructions for setting the clock "AMST 3003" (photo below), is set as follows:
- Press the bottom button on the left three times, then repeat the process with the bottom right analog five times.
- The top right key allows you to adjust the electronic hand (it will start flashing in the part indicating the days of the week).
- Fixing information and returning to the operating mode is performed with a single click of the bottom button on the left.
- Names of days are indicated in abbreviated English transcription.
Alarm Clock
The alarm sound on the watch in question is set automatically. You can disable it by simultaneously holding the two right buttons. The fact that the alarm is turned off will be indicated by the soundtrack. You can return to normal mode by pressing the leftbuttons below. Information about the set alarm parameters becomes available after activating and holding the lower right button.
As written in the instructions of the watch "AMST 3003", the alarm setting is performed in this order:
- The lower left button is pressed twice.
- The required clock readings are set using the right button from above.
- The lower right button is activated.
- Exact minutes are adjusted by the top button on the right.
Additional functionality
The AMST 3003 watch, the instructions for use of which is presented above, has a backlight function on LEDs, which is activated by the top button on the left. The device is switched to the stopwatch mode by pressing the lower left button. It also serves to stop readings. You can reset the information by pressing the button located at the bottom right. If there is a periodic flashing of the stopwatch sector, this indicates the normal operation of the mechanism and sufficient battery charge.
