Voltage stabilizer "Resanta" ASN-10000/1-Ts is one of the best devices in its field. The company that produces this product is domestic. The company has long been a leader in this area in the sales market. The product is characterized by excellent quality and relatively low cost.
Instrument parameters
Since voltage stabilizers "Resanta" ASN-10000 are electrical products, the most important part of it is the technical parameters. Here you need to highlight the following points:
- type of connected network - single-phase;
- working range of input voltage - 140-260V;
- the power of these instances is 10 kW;
- output voltage is 220V;
- this device is connected to the network through special terminal blocks;
- has a bypass;
- the efficiency of the device is 97%;
- workingdevice temperature - from 0 to 45 degrees Celsius;
- working air humidity should not exceed 80%;
- model relatively heavy - 19.5 kg;
- dimensions - 220x230x385;
- type of installed protection - IP-20.
Brand voltage stabilizer "Resanta" ASN-10000/1-Ts is deciphered as follows: automatic voltage stabilizer, power - 10 kVA. The letter H means that the model is wall-mounted, the number 1 indicates the type of connected network - single-phase. At the end there is also the letter C, indicating the presence of a digital indication on the front panel of the device. The incoming voltage will be highlighted in red, the outgoing voltage will be highlighted in yellow.
Technical description
Speaking of the Resanta ASN-10000 voltage stabilizer, we can mention a few more important features.
Firstly, the device belongs to the class of household relay economic devices. Its operating range is quite standard for its class, there are no special nuances or "highlights" in the device. The main characteristics of the stabilizer are indicated on its front panel.
Secondly, it is worth saying that the design provides for a cooling fan. It does not work constantly, but as the power part of the device heats up. If the temperature reaches a certain value, it turns on. When the indicators fall below a certain mark, it also automatically turns off. relay typeThe device has several levels of adjustment, but is not very accurate. Adjustment accuracy is 8%.
Device flaw
The device is quite good, with a low cost, and therefore is popular, but it is not without flaws. The main one is that the stabilizer does not turn off when the input voltage rises. Everything is quite simple here. As the input voltage increases, the output voltage also increases. For example, the voltage at the input can reach 270 V, and at the output of the stabilizer it can be only 250 V, and at the same time it will not turn off.
The termination of its work will occur automatically only with an even greater increase in voltage, which will still pass through it to the network. In this case, the letter "H" will appear on the front panel on the indicator, and the device will finally stop working. This value on the indicator means that the stabilizer's overvoltage protection is on.
Location of instrument elements
The front panel of the voltage stabilizer "Resanta" ASN-10000 is standard for such electrical products. The display type of the LCD device, which is equipped with all powerful models. The indicator is not able to display deviations from the set values that do not exceed 8%, which is a rather unpleasant moment. At the top of the panel there are devices for displaying operation, protection, delay.
Naturally, each of the signaling elements is included incertain time of operation of the equipment. On the left side of the panel is a load indicator, and on the bottom - overload and overheating.
In addition to the above elements, there is another two-section switch on the front panel of the Resant stabilizer. Its left side is responsible for turning on / off the bypass, while the right side is for turning on / off the entire device. If the bypass mode is enabled, then the input and output voltages will be equal, since the power blocks that correct it are turned off, although the device itself is still considered part of the system.
Location of terminals for connection
The wires are connected to the stabilizer at the bottom of it. In this area there is a special hatch that can be removed to get to special terminals with screws for a screwdriver. With their help, the device is connected. Usually, when selling such equipment, a special document is included with it - an instruction manual. Everything is listed here, from the connection method to the care methods.
Selecting an installation location
The process of connecting the device itself is not very complicated, but you still need to know the general principle. Instructions will be provided below. But first you need to choose the right place for direct mounting of the device, as this is an important part of the entire connection process.
There are a few mandatory things to do. They are listed below in order of theirsignificance:
- The most important thing is to prevent moisture from getting into such equipment.
- Be sure to ensure free circulation of air around the body of the device to avoid overheating.
- It is best to install the stabilizer as close to the input shield as possible.
- When installing, you need to remember that electromechanical devices emit a characteristic noise during operation, and relay devices, which include ASN-10000/1-C, clicks.
- The unit must be installed in such a way that connection, control and maintenance can be carried out without difficulty.
- The best place for such devices is a wall or shelf.
Connecting the stabilizer
You can connect the voltage stabilizer "Resanta" ASN-10000 only after all the above conditions are met. To carry out this process, the device has 5 special terminals. Two of them are marked with the letters "L" - these are phase terminals. Two more will be marked "N" - neutral. The last, fifth, terminal is intended for grounding the device.
The process of connecting such units begins with grounding. After that, you can proceed to connecting the input wires. The terminals for their connection are indicated by a similar inscription: "INPUT". Naturally, the phase wire must be connected to the "L" terminal, and the neutral wire to the "N" terminal.
After thatyou should turn on the stabilizer and check the presence of voltage at the output. If it is present and within the normal range, then everything is connected correctly. The unit is then switched off again to connect the output wires. The principle of their connection is similar to the input.
If there is no output voltage, you should usually check that the wires are connected correctly and swap them if necessary.
EM Stabilizers
This company produces another device with a power of 10 kW - voltage regulator "Resanta" ASN 10000/1-EM. As for the main technical indicators, this device is in many ways similar to the 1-C model. Its power is also 10 kW. The operating voltage range is 140-260 V. However, the actual power will drop when the voltage drops below 190 V, and when working with a minimum input of 140 V, it will completely drop to half of the initial value. The efficiency of this model is also 97%.
The main difference between these models is the accuracy of adjustment. If 1-C had an accuracy of 8%, which is quite bad, then the 1-EM model had an accuracy of 2%, which is considered an excellent indicator. In addition to the difference in accuracy, there is a difference in the design. Equipment of the 1-EM brand is distinguished by electromechanical switching, and not by relay, as in 1-C.
However, because of this, it is worth paying attention to such a parameter as stabilization speed. 1-EM is designed for long-term operation with low or high voltages. The stabilization speed of the electromechanical device is 1-2 seconds. relaythe device is characterized by a speed of 20 milliseconds. That is, 1-C will be more preferable in networks with frequent drops due to a faster response to these changes.
"Resanta" Lux
Voltage stabilizer "Resanta" ASN-10000 Lux in its characteristics is very similar to the 1-Ts model. The device also belongs to the relay models, has forced cooling protection against overheating, short circuits and other things. It has a poor accuracy of 8%, etc. It is worth saying that the input frequency with which it can work is in the range of 50-60 Hz. In addition, the device will be somewhat larger in size - 305x360x190 mm, which is why it is somewhat heavier. This should be taken into account when installing the unit.
If we talk about malfunctions of the voltage stabilizer "Resanta" ASN-10000, then for electromechanical models - these are frequent voltage drops. Because of them, the winding elements become very hot and the engine may fail.
Relay devices have about the same basic malfunction, but it consists in the failure of the relay itself. The more frequent jumps, the faster it wears out.
Reviews about the operation of the device
It is natural that any company will present its product only from the best side, forgetting to point out the shortcomings. However, people talk about the quality and reliability of this equipment. Reviews of voltage stabilizers "Resanta" ASN-10000 are mostly positive.
Many buyers note a fairly affordable price for this device. At the same time, he is excellentcopes with its duties and is characterized by good build quality. One of the buyers noted that there was a strong power surge in his network, due to which many household appliances burned out for almost all users connected to the same network. However, the stabilizer from the company "Resanta" did an excellent job with the task of automatically turning off the power.
Of the shortcomings, only the one indicated in its characteristics is usually indicated, namely: a low level of accuracy. Although some users note that 8% is enough for ordinary household appliances.
Based on the above, we can draw the following conclusion. Stabilizers from the company "Resanta" are not in vain widely popular. They combine low cost, excellent quality and decent technical parameters.
