Probably, each of us, having acquired a brand new tablet, would think about how to protect it more reliably from scratches, moisture and shock. After all, you will constantly use it, take it with you to work, study, etc. During operation, it can be significantly worn out. Of course, a case and a protective film will be a mandatory attribute. Everything is clear with the case - choose the size, and then put it on your gadget and that's it! But with how to stick a film on a tablet, many may have difficulty. It must be adjusted to size, carefully cut, etc. Most do not know how to do this or simply do not want to! But everything can be learned. That is why we want to tell you about how to stick a film on a tablet yourself.
How to choose
On the shelves of electronic equipment stores you can see a large number of protective films. They will differ in price, size and quality. The coating can be different in its structure - glossy or matte. In terms of their protective qualities, both are good, but we would prefer a matte film, because it does not leave fingerprints. But the gloss will need to be periodically wiped off, because afterwork on it will leave traces of sweat.
How to stick a film on a tablet
- Wash your hands.
- Open the package where the protective film is located. It usually comes with a special microfiber cloth. So, thoroughly wipe the tablet screen with this napkin.
- If the protective film is not the right size, but a little larger, cut off the excess with a clerical knife or blade.
- Now you need to get rid of the shipping layer. To do this, pull the tab with the number "1" and immediately the side of the film that is released, lean against the top of the screen and slowly paste. So, gradually tearing off the transport layer, we reach the end.
- Flatten the film well and use a plastic card to expel any bubbles, if any.
- Remove the top shipping layer by pulling on the "2" tab.
Well, now you know how to stick a film on a tablet.
Helpful tips
- It is better to stick a protective film in the bathroom, because there is high humidity, and, accordingly, there is no way for dust to get on the tablet.
- If you don't have a good wipe that doesn't leave lint on the screen surface, don't worry! All that remains of it can be removed with adhesive tape. It will quickly collect all the fluff from the display surface.
- If dust accidentally gets onfilm, then you can get rid of it with ordinary running water. To do this, rinse it under the tap and then dry it with a hair dryer. Do not worry! The sticky surface will not suffer from this.
Conclusion
As you can see, if you follow all the rules of how to stick a film on a tablet, everything can be done quickly and efficiently. But if you miss at least something, then all efforts will be in vain - you can spend a lot of time, nerves and money! Therefore, if you are not confident in your abilities, ask your friends where to stick the film on the tablet. Usually this service is provided in almost all salons where such equipment is sold, but keep in mind that you will have to pay for the service.
