Matrix cleaning: accessories, cleaning methods, step by step instructions

2024 Author: Trinity Chesterton | [email protected]. Last modified: 2023-12-16 08:12

An experienced photographer knows how to easily take care of sensor cleaning and remove smudges in a few easy steps. Most imaging cameras today include a protective layer that is sealed in front of the sensor package window. In color models, this protective glass also functions as an infrared filter. Sometimes a small amount of dirt appears on the glass surface. On camera models that do not have a protective layer, dirt and dust particles may enter the sensor package window. These particles cause unwanted effects in images. To correct this problem, you need to clean the image sensor.

Checking sensor contamination

For photographers, there is nothing more frustrating than a camera sensor full of dust and smudges. When a photographer works outdoors with a lens or changes lenses outdoors, dust constantly settles on the camera elements. Even studio photographers often struggle with a dirty sensor. First and foremostThe point of reference is diagnostics. It may seem strange, but it can be considered the most important part of the process. Dust collects at different speeds. However, it is not the only substance that appears on the sensors. It can also be: sand, dirt and hairs or fibers. Each one requires a different method to clean the sensor to get rid of, and it is often difficult to find one without knowing the diagnosis.

If the photographer is shooting wide open or large apertures, they may not see any sensory debris in the images, in which case they will need a PC monitor. After setting the aperture to f/11 or f/22, for example, the sensor dust will become visible, as if it came out of nowhere. This is sensory dust and needs to be identified early in its formation.

To check for sensor dust, you need to set the smallest aperture on the lens (largest f-stop, f/32 for example) and take a picture of a white wall or other light background. Then open the image in Photoshop and click Auto Tone, under the "Images" menu item. Do not be afraid if "horror stories" suddenly appear all over the screen, subsequently effective cleaning of the matrix will eliminate everything.

A useful tool to avoid having to take test shots while cleaning is the sensor magnifier (7x magnification or more is recommended). When using a magnifying glass, the dirt will be more visible.

Auto cleaning function

Even with self-cleaning, sensory spots are more of a problem today than they were a few years ago. Image manipulations such as HDR or contrast like tone mapping, including in many popular filters such as Nik and Topaz, will show blemishes that users have not noticed before. Therefore, many new devices began to be equipped with a function for automatically cleaning the image sensor.

You can find it in the "Tools" menu. When this tool is used, the camera gives the sensor a series of micro-vibrations that "shake" the dust. The user may have to repeat this process several times. You need to be patient and in a few minutes the camera will be free of most sensor contaminants. If this function is not available on the device, there is a manual way to clean the sensor.

There comes a time when even photographers with automatic camera cleaning have to do manual cleaning. We bring to your attention the most effective way to clean the camera sensor.

Using sensory wipes and Eclipse fluid

Sensor wipes are a specially designed cleaning cloth for camera sensors. When used with a few drops of Eclipse Cleaning Fluid, they work together to clean the sensor well. You can get wipes exactly the size of the sensor, so that with one movement in each direction everything that interferes with taking high-quality photos is removed. They can be successfully applied even to a tiny Swiffer sensor.

Camera sensor cleaning procedure:

1. Apply2 drops of liquid on a tissue or swab, and then gently swab the transducer.
2. Then change direction and go in reverse order.
3. If you need to repeat the process, use a new swab.

To use this cleaning method, you will need to hold the mirror and allow access to the sensor. This is a difficult task if the user does not want the speculum to come down while the tampon is inside the chamber.

Procedure:

1. If the camera does not have a Lock Mirror Up for Cleaning setting, make sure the battery is charged and set the camera exposure.
2. The Bulb setting will hold the mirror until the shutter is released.
3. To do this, you need to use a retainer to hold it, but not with your finger.
4. Access the sensor.
5. Check the cleaning quality, take a picture at the same aperture and compare.
6. Be careful, otherwise the sensor will be damaged beyond repair. And you also need to remember to be careful and never touch the sensor with your fingers. Finger grease does more damage than dust and is much harder to remove.

Recently, the kit for cleaning the Altura camera matrix has been popular with amateur photographers. Set Include:

1. Altura Photo Lens Cleaner.
2. Lens brush.
3. Air purifier (pear).
4. Altura Cleaning Cloths 50 Sheets for Camera Cleaning.
5. Tissue paper, 3packaging.
6. Oversized and Original MicroFibers Premium MagicFiber Cleaning Pads.
7. Altura Photo Premium Lens Cleaner.
8. Matrix cleaning mops.

Static Prevention

CCD image sensors are easily damaged by static discharge. Be sure to observe the following safety precautions before handling them:

1. Use anti-static gloves, clothing, shoes, a mat on the floor or desktop to prevent the generation of static electricity.
2. Perform all SLR sensor cleaning operations in a clean, dust-free room.
3. Both the protective glass layer and the sensor packaging window are very fragile, so it is important not to touch them with your fingers.
4. To remove dust and dirt, first gently blow off the particles with compressed air. Experts recommend using ionized air to help remove dirt stuck to the surface due to static electricity.
5. If debris cannot be blown out, apply a small amount of lens cleaner such as Eclipse Optics Cleaner or ethyl alcohol to a clean lens tissue that is made specifically for cleaning optics.
6. The cloth should be damp but not dripping.
7. It is better to use wipes from the SLR camera sensor cleaning kit.
8. Wipe with a cloth along the length of the glass surface softmovements.
9. Do not press the surface or press the fabric hard several times in one place.
10. If streaks or streaks occur, wait for the glass to dry before cleaning again.
11. After finishing cleaning, inspect the surface in bright light.
12. If dust spots remain, repeat this procedure using a clean cloth.
13. If nothing has changed, perhaps the dirt is under the glass.

Processing with Arctic Butterfly

There are a variety of sensor cleaning tools to help you clean. It is best to have a special matrix cleaning kit. Some are more effective in certain methods than others, but the advice from the experts is to use a static charged brush called the Arctic Butterfly or Visible Dust.

Its functionality is ensured when the brush is charged. Carefully and slowly work it on the sensor, using the very end of the brush to contact the sensor. It is advisable to place the camera on the work surface at this point so that the user can hold it securely in place while cleaning.

Any grease on the brush will be transferred to the sensor, so do not touch the brush with your hands, and do not put it on any surface without a special cap.

Perform a few sweeps with a brush, removing dirt that is not attached to the sensor. And after cleaning, take one test shot to make sure it was effective.

Digital SLR camera

To start cleaning your SLR sensor, you need to have the right equipment, such as Visible Dust Arctic Butterfly, Fluids and cleaning wipes in the right size for your camera. DSLR Sensor Cleaning Process:

1. Remove the lens from the camera, insert a fully charged battery to access the menu option to clean the sensor. Many modern cameras have an automatic and manual option to block the mirror.
2. Nikons usually has a "mirror block" option. If the user is not sure, then you need to refer to the instructions.
3. Clean the DSLR sensor with air. This tool, which all photographers should have in their kit, is inexpensive and invaluable for cleaning the sensor of a SLR camera.
4. Cleaning is done with the camera on the ground so that dirt can be removed by gravity.
5. Point the blower nozzle into the sensor chamber, at least 3cm away from the sensor surface, and purge 10 times with air.
6. If the user is not successful in cleaning, they should perform wet cleaning.

SLR sensor wet cleaning

It should be considered as the most extreme measure of sensor cleaning and the most dangerous. It is not difficult, but if the user is not sure about the contact with the sensor, it is better for him to take the camera to a professional sensor cleaning service at the place of residence.

There are many tampons and liquid combinations, and most of them are quite effective. SpecialistsStandard Sensor Clean fluid is recommended. It is very good to use, it almost never leaves streaks and removes almost all types of dirt.

Starting Canon sensor wet cleaning:

1. Place small drops of the selected liquid on the tip of the swab. 2 or 3 drops are enough to cover the entire tip. When doing this, you need to be very careful to make sure that the tampon is not too wet. Otherwise, it may cause liquid to seep into invisible areas of the sensor chamber and cause permanent damage to the chamber. If by chance the tampon is more than necessary, it is better to throw it away.
2. Do not apply too much swab pressure on the sensor, the glass is very thin.
3. Allow the sensor to dry and repeat the procedure, but on the other side. Two sweeps should be enough to remove the vast majority of dirt.
4. Check the sensor, install the lens and take a test shot or just look through a magnifying glass.

iPhone camera lens

One of the easiest and most effective ways to clean with a can of compressed air from any hardware store. The only requirement for him is that he must not have any chemical additives, that is, be absolutely pure.

Procedure:

1. Apply compressed air to lens.
2. The iPhone's screen is well protected, but you still need to be very careful not to break the camera because compressed air can be powerful. Blowing with compressed air is carried out ondistance of at least 30 cm from the screen. In cases where compressed air does not remove dust from the lens, you can clean it with a microfiber cloth.
3. If the dust doesn't go away, it's most likely stuck under the lens. In this case, it is best to contact a technician.
4. Do not try to disassemble the phone yourself, disassembling it may damage the device and void the warranty.
5. If fingerprints or other smudges are seen on the phone's camera, use microfiber cloths, which are readily available at most stores or pharmacies.
6. The texture of these fabrics can easily remove smudges and fingerprints.
7. Remove the cloth from the package, and gently wipe the surface of the iPhone camera lens.
8. Clean as thoroughly as possible to remove unwanted prints and smudges.
9. When cleaning, avoid applying chemical cleaners to the surface.

Canon Dirt Reduction

Dust on the sensor is displayed as gray in the digital image. This issue also affects photos. In a digital camera, dust remains on the glass filter and affects each subsequent exposure. It's easier to retouch digital images than negatives or prints, but it can still create a lot of problems.

Research has shown that one of the main causes of dust is the camera itself. This explains why photographers who change lenses infrequently suffer from dust and are required toCanon camera sensor cleaning. There are two important areas associated with the camera that generate dust. One of them is a shutter. Every time it fires, the friction between the components can create dust.

The latest camera shutters have been designed to create a minimum amount of dust during operation. The other major problem is the plastic housing cover. When it is attached or removed, friction between the metal attachment and the plastic cap can also generate dust.

Since the first half of 2005, the case cover has been made from a material that attracts very little dust. A modern housing cover made from a different plastic that reduces the amount of dust inside the camera. Since dust is almost inevitable, most thrifty photographers always have an SLR sensor cleaning kit at home.

It is known that prevention is better than cure. You can't completely stop dust from entering a digital camera, but you can greatly reduce it by using one or more of these simple procedures:

1. Turn camera off before changing lenses. This reduces static on the sensor and stops dust from being attracted.
2. Turn camera off before removing body cap or changing lenses.
3. Don't leave the cell open.
4. When a lens is removed, it must be immediately replaced with another lens or covered with a camera body cap.
5. You should avoid changing lenses in dusty situations.
6. If you need to changelens in dirty conditions, you need to hold the camera with the lens holder down to reduce the risk of dust entering the hole.

Caring for your Nikon camera

Many aspiring photographers who have recently bought their first DSLR camera turn to specialists with questions about proper care and cleaning of the Nikon sensor. For general safe storage, it is highly recommended to store cameras and lenses on a clean and dry surface such as a dry cabinet or drawers. In a damp cabinet, mold may form on the equipment.

Because photo accessories are available in a wide range of shapes and sizes, you need to choose a volume that will conveniently store your camera, lenses, flashes and cables. The best way to keep dust off the camera sensor is to minimize the exposure of the sensor to the environment. This means that people who only own one lens will probably never find a single dust spot on the sensor. But most who own more than one lens find dust spots on the sensors from time to time. It depends on how often they change the lens and the environment in which it is done.

If the DSLR is stored without a lens installed, there will be more dust, so you need to remember to close the case. Many photographers prefer to protect their lens by screwing in an ultraviolet (UV) filter. While this does protect the lens from scratches, all UV filters cause lens flare, especially when bright light shines directly into the camera.

Production of pathologicalhabits of lens cleanliness, even when not in use, should become the norm and be a better and more economical practice for keeping your camera free of contaminants.