Today, phones from China are gaining more and more popularity. This is primarily due to the fact that the prices for these devices, compared to other branded models, are much more affordable. But recently, phones from China have become distinguished by increases in functionality. They have features that Western counterparts cannot boast of. Maybe there would be no problems, but Chinese-made phones are endowed with one serious flaw - low-quality assembly. And this is what causes all sorts of trouble. Of course, there are ways to fix defects, and here we will look at them, as well as learn how to flash a Chinese phone.
The main reason why you need to flash a Chinese phone is its Russification. To do this, all memory is merged from the device, and thenprocessed. After processing, all data is uploaded back. This is the whole focus of the firmware.
Before flashing a Chinese phone, you need to get the FlashTool program. Let's take a quick look at how it works. First you need to run the program. After clicking the "DownloadAgent" button, select "MTK_AllInOne_DA. Scatter". After that, go to the options, here we need "com port". Next, select exactly the port to which you connected your phone. Go back to options and find "baud rate".
Go to the "readback" tab: here, after clicking on the "add" button, the entry "NA 0x00000000 0x00000000ROM_2" should appear. Double click to the right of the letters NA. In the window that appears, specify the "back up" file.
Press the "readback" button and turn on the phone. A red line should appear on the screen below, and a little after - the type of processor in the left corner and the marking of the memory chip in the right.
Go to the "download" tab, press the "format" button and then - "manual format FAT". Hold down the power button for no more than one second. As a result of this action, a green bar will appear at the bottom of the screen. At the end of these procedures, turn on the phone.
As you can see, everything is quite simple. Now let's see how to flash a Chinese phone for troubleshooting.
There is one good program - Spiderman 2.50. It allows you to flash phones from China that run on ADI, Spread, MTK and other processors. It should be immediately mentioned that forfirmware you need to use only suitable programs. This will guarantee the correct operation of the phone. And for insurance, keep your native firmware.
So let's get started. Open the program and click "Connect". We also set the desired COM port number. We set the speed we need (115200), and then press the "Boot" button. In the case of correct operation, you will see the process of determining the parameters in the working area. After a while, they should appear themselves.
The main thing here is not to miss an important moment and keep the native firmware on your computer. To do this, use the "Read" button.
To upload the firmware to your phone, use the "Flash" command and wait for the program to complete. Recall once again that this program should match the characteristics of the original as much as possible. I must say that it is quite simple, and most importantly - effective. And to the question of whether it is possible to reflash a Chinese phone, there is only one answer - yes! But it would be better if professionals take care of this matter. Here, as in any other business, there are many nuances and pitfalls. Therefore, before flashing a Chinese phone, study the information that relates to this issue.
