When loading the drum with laundry, you find that the washing machine does not turn on? It may not respond at all to button manipulations, not respond to the launch of the selected program, or the indicators start to work in a chaotic manner. Depending on what is the cause of the malfunction, the problem can be solved either independently, without calling a qualified technician, or by contacting a service center.
What to do first if the washing machine does not turn on? What could be the cause of the malfunction and how to fix it yourself?
No indicator lights up? Possibly no electricity
Initially, you should check the performance of sockets and electricity in the house.
You need to see if the device is connected to the outlet at all. Everything is possible, it will not hurt to check once again whether someone has disconnected the wire from the network.
Needalso check if the electricity is working throughout the house. During the day, you can’t immediately notice that the lights have been turned off.
Check the operation of the outlet or extension cord into which the machine is connected, follows. Checking the outlet is simple: try turning on any other appliance, if it does not work, you should connect the washing machine to another outlet. The extension cable can be tested by connecting the washing machine directly to the mains.
Check the machine on the counter. If one of the machines is disabled, turn it on by lifting the lever. If the machine turns off every time the washing machine is turned on, then you need to look for the cause. The first step is to check the power cord, if you can see with the naked eye that it is "short", you will have to replace it. In other cases, it is worth calling a specialist, since the problem is most likely inside the device itself (short circuit of the heating element, control board, electric motor, power button). Spare parts for washing machines are very expensive, so it’s not worth guessing what exactly is out of order without special knowledge. Better leave it to a professional.
The residual current device (RCD) can also turn off the electricity in the house. It is triggered by a power outage. If the machine is electric, then the matter is in the RCD. The reason may be a malfunction of the wires inside the machine (their integrity should be checked) or a breakdown in the heating element or the engine (replacement will be required).
If everything is in order with electricity and sockets, the problem lies in the washing machine itself. There may be several reasons.
Power button
In some washing machines, the current is output to the power button. Unfortunately, without special devices, its performance cannot be verified. You will need a multimeter (tester). When the washing machine is de-energized, it is necessary to ring the first turned on, then turned off button. If the device emits a squeak when the button is called in the on state, then it is working. In the off state of the button, the multimeter device should be silent. If the button is defective, it needs to be replaced.
Noise filter (FPS)
It is necessary so that the electromagnetic waves emanating from the device do not interfere with surrounding household appliances. If it malfunctions, the current supply stops and the washing machine does not turn on at startup. To check the noise filter, just like with the power button, you need to ring it with a multimeter.
FPS needs to check input (three wires) and output (two wires). If there is voltage at the input during ringing, but not at the output, then the device is faulty. Replacement required.
Control module
If all of the above is correct, then the problem is in the control module. It is a board that regulates the operation of the entire washing machine. In order to identify a breakdown, it is necessary to ring all parts of the electronic system. If a malfunction is detected, the element is changed or soldered. Unfortunately, without certain skills, such repair of washing machines will not work on your own. There is a risk of damaging the control module beyond repair. A complete replacement is expensive.will cost. It is better to call a specialist who repairs washing machines on a professional basis.
An amateur mistake may lead to the need to purchase a new device.
Indicators are on, but the washing machine does not turn on: reasons
There may be a problem in blocking the hatch of the washing machine. If it malfunctions, water will not be supplied to the drum. First you need to make sure that the hatch is tightly closed. Then you should check if the door locks after starting the program.
If it closes with a click, but does not block, then it is necessary to replace the UBL - the hatch blocking device. In order to verify the malfunction, it is necessary to ring the UBL with a multimeter when starting the washing program. If there is voltage at the input, and the door does not block, replacement is required. It should be noted that all spare parts for washing machines should be bought only in specialized stores that have certificates for goods. It is better not to purchase components in dubious online stores at clearly underpriced prices or through bulletin boards.
Indicators flash randomly
This is a problem in the internal wiring of the washing machine. To identify a breakdown, ring the wires with a multimeter and replace the problem area. According to many service center masters, this is a fairly common reason why the Indesit washing machine with a mechanical control system does not turn on.
The main thing is sorted out. After analyzing the reasons why the washing machine does not turn on, it becomes clear that, unfortunately, most problems require electrical repair skills. Therefore, if the owners do not have certain knowledge, it is best to entrust this matter to qualified craftsmen.
