Some radios with a retractable screen and navigation are very difficult to connect. In this case, it is important to consider the type of adapter, as well as the presence of an adapter. Many models are produced without a switch. In order to install the device yourself, you need to purchase it separately.
Also keep in mind that the battery connector can be without an adapter. Many models are available with four speakers. In this case, you need to know the design features of the panel. In order to understand this issue in more detail, you should consider the most popular modifications.
Connecting Alpine 9881
This radio can only be connected via a three-wire adapter. First of all, you need to find the connector. Only the blue adapter is allowed to be connected to the adapter. There are two wires coming out of it. The speakers use a blue adapter. To connect it, you need to use an extension cord. In some cases, the contactor may not be suitable for the stereo system.
In this situationyou need to consider the type of output connector. In some cars, the old-style adapter departs from the panel. In order to solve this problem, you need to purchase an adapter with a head. It must fit under the stereo connector. At the end of the work, the rear speakers are connected.
Installing the GT M11 device
Connecting these retractable screen radios is quite simple with a three-prong adapter. In the standard kit it is available with conductors of different colors. First of all, experts recommend connecting a stereo system. In this case, you will need an adapter with a red output. It is also important to bring an extension cord before connecting. Rear speakers are connected last.
Green adapter is used to fix the subwoofer. In this model, it turns on through the receiver. The unit is directly connected through the blue connector of the stereo system. Rear speakers can be connected via the remaining black adapter. In this case, two wires depart from it. A purple contact is used on the rear left speaker. There is a yellow wire to connect the right speaker.
Connecting the radio GT M15
Connecting the specified radio with a retractable screen (photo shown below) is quite simple. In the standard set of the model there are three adapters of different colors. The stereo system is connected to the car first. To do this, you need to check the output connector, which is located on the panel. If there is a two-pin adapter, makeeverything is pretty simple. However, if another type of element is used in the car, then the task of connecting the radio is much more complicated.
Many experts in this situation recommend buying a contactor. The specified part will help connect the adapter, as well as the adapter that is installed in the car. When connecting a stereo system, it is important to pay attention to the output connector. The wire to it should be supplied exactly blue. In this case, an extension cord is not required for connection. After installing the stereo system, you can proceed to the speakers. For this purpose, a green adapter is taken.
There is a gray wire on the left speaker. The adapter itself must be located next to the adapter. At the end of the work, it should be hidden behind the stereo system. However, before that, it is important to connect the right speaker. For this, a yellow adapter is taken. The wire for the connector is selected with an extension cord. The connection output in this case is also colored yellow.
Connecting Prology DVS-2135
The specified radio with a retractable screen and a navigator is presented on the market with two adapters. In this case, the device is connected to four speakers. First of all, it is important to remove the previous radio and carefully inspect the output socket. Some vehicles may have a conventional plug-in type adapter installed.
In this case, the radio should be connected through the red conductor. To do this, first of all, you need to check the output to the battery. After fixing the greenconductor, you need to start connecting the speakers. For this purpose, many experts recommend using a contact receiver. In the store it is sold with clips. If you connect a subwoofer, you will need an adapter with a double.
Installing the EasyGo C200
The indicated radio tape recorder is connected to the car with a retractable screen via a contact adapter. There are three boxes of wires included with the device. First of all, it is important to deal directly with the stereo system. To do this, the blue contactor is removed. It must be connected directly to the battery connector. In some cases, the adapter may not fit the outlet. In such a situation, a three-wire adapter is used. There is a blue conductor for connecting speakers. A contactor with a red output is used to connect the speaker.
EasyGo C300 radio connection
This retractable screen car radio can be connected by yourself. First of all, it is important to check the equipment of the device. There are two contactors in the standard set of the model. The adapters themselves come with blue and red wires.
If the connector uses a three way adapter, the adapter will require a fuse. In this case, the speakers are connected last. A red contactor is used to connect the subwoofer. This model has it installed with two green wires. The left speaker uses a blue conductor.
Photo with connecting model EasyGo C500
Installing a radio with a retractable screen does not take much time. First of all, you need to make sure that you have a three-pin adapter. In this case, the stereo system is connected via a red adapter. Blue and gray wires come out of it. An extension cord must be used for the battery connector. In order to connect the front speakers, a red adapter is used. The adapter in this case is used for three contacts.
A gray conductor is connected to the left speaker. Before turning on the stereo system, you need to check the quality of the insulation. A blue conductor is connected to the right speaker. Rear speakers require a yellow adapter. The standard set includes red and blue conductors. There is a red exit on the back left knee. In this case, the conductor is connected through an extension cord. The blue conductor is used for the right speaker. At the end of the work, it remains to connect the subwoofer. This can be done through a contactor.
Installing JVC KW-V11
The indicated retractable screen radios are manufactured with a standard adapter. The stereo comes with two adapters. In this case, the contactor is used with four connectors. First of all, the stereo unit is connected. For this, the first adapter is taken. Its output is colored red. A second adapter is used to connect speakers. It has three wires in total. A contactor is required to connect rear speakers.
Connecting the radio JVC KW-V13
The indicated radios with a retractable screen can be connected through a conventional two-pin adapter. In order to install a stereo system, an adapter with a red connector is used. In this case, many experts advise paying special attention to insulators. They must not come into contact with the stereo unit. The front speakers use a green adapter with black outputs.
The left speaker of the car is connected with a yellow wire. The right speaker has a green connector. In order to connect the rear speakers, an adapter with a blue output is used. The unit has a separate subwoofer connector. The exit below it is colored blue.
Connecting Sony XAV-701
These retractable screen radios are only connected via a contactor. There are two adapters in total. Stereo adapters should be used in red. In this case, two wires depart from the adapter. There is a blue connector on the left speaker. The gray conductor is used for the right speaker. The subwoofer can be connected to the indicated radio via a contactor.
The wire for the connector is taken in red. After connecting the subwoofer, connect the rear speakers. This is done only through an extension cord. First of all, it is important to note that the rear speaker adapter is blue. The red wire must be connected to the left speaker. There is a yellow connector on the right speaker.
