How to set up a satellite dish

How to set up a satellite dish
How to set up a satellite dish
Anonim

Recently, satellite dishes can be seen in almost every home. But before they start working, they need to be configured. Setting up a satellite dish is not as difficult as it might seem at first glance. There are two main variations of this procedure.

Setting up a satellite dish
Setting up a satellite dish

The first way will appeal to those who do not want to tune the plate themselves. To do this, you just need to apply for a service to the company in which you purchased the satellite dish. They will come with their equipment and do everything. And the owner at this time can go about their business.

The second method implies that the satellite dish will be configured independently. It should be said right away that it is best to install it on the roof: it will not be an eyesore, and the setting will be better. The mount should also come with the plate, so it is not difficult to fix it there. It is also worth noting right away that in the future, many are thinking about upgrading their satellite equipment. Therefore, it is also necessary to provide for this.

As the first task thatincludes setting up a satellite dish, there will be a vertical alignment of the pipe for which the dish will be fixed. If you do not take into account possible modifications, then this may not be useful. But just in case, you can simplify your task in the future. What if you later want to install a special polar suspension and actuator? Therefore, it is best to align the pipe as it should. After that, you will need to attach the plate itself to it. To prevent it from slipping, you can purchase additional fasteners in specialized stores.

Program for setting up a satellite dish
Program for setting up a satellite dish

Then you should run the cable. It should be understood that the longer the cable section is open, that is, on the street, and not under the roof, the more likely it is to be damaged after a thunderstorm.

Having connected the cable to the TV, you most likely will not immediately see all the variety of channels. For their appearance, it is necessary to set up a satellite dish. You should find at least one channel, even with ripples and no sound. It will subsequently simplify the tuning process itself.

Setting up a satellite dish telecard
Setting up a satellite dish telecard

In addition, setting up a satellite dish will be greatly simplified if it is also installed within sight of someone. To choose its direction, you should focus on the found and installed equipment. In other words, where it is directed, you should direct your device there. If there are no plates nearby, then you should know that the equipment must be directed tosouth.

If there is a special program for setting up a satellite dish, then you should first of all be guided by its indicators. If not, then you need an assistant who will stand by the TV and talk about the results. Your duties include gently turning the plate up and down, left and right. It is worth knowing that even one centimeter can affect the quality of the channels. It is necessary to move until the assistant reports that everything is fine.

It is necessary to tighten all the bolts as much as possible and carefully after the satellite dish has been adjusted. A telecard, you should also know this, you will need it in order to unlock a large number of channels. Otherwise, only the main ones will be shown.

Recommended: