In most cases, when buying a mobile phone, a SIM card is additionally attached to it. To start using the device, it must be activated. If you are an experienced user, then this will be a matter of just a few minutes for you. What about newbies? This article will help them. It details how to activate a Beeline SIM card.
If you have purchased a new cell phone, you should know that without activating the starting balance you will not be able to make calls and send SMS messages. What then to do? How to activate a Beeline SIM card correctly? We offer you step by step instructions.
Step number 1. So, you have an envelope in your hands, in which there is a SIM card. Carefully open it and take out the SIM card. Separate it from the plastic base. Sometimes it can be quite difficult to do this, so you can’t do without something sharp. It can be nail scissors or a pocket knife.
Step number 2. Having separated the SIM card from the base, insert it into the mobile phone. To do this, the device must be turned off and its back cover removed. Certain cell modelsphones also involves removing the battery. The SIM card must take place in a slot designed specifically for it. If you can't find it in any way, then refer to the instructions that came with your mobile phone. Before activating a Beeline SIM card, make sure it is correctly positioned in the slot. The yellow contact strips should be at the bottom. If so, you can replace the battery and close the back cover.
Step number 3. Turn on the mobile phone by pressing the appropriate button and holding it for a few seconds. How to activate a Beeline SIM card? To do this, you need to enter a PIN code. You will find it under the protective layer applied to the plastic base. Carefully erase it and get the coveted pin code.
Step number 4. When answering the question of how to activate a Beeline SIM card, it is worth noting that during this operation it is important not to damage the pin code. If you enter it incorrectly 3 times in a row, then the SIM card will simply be blocked. However, don't worry if this happens to you. You can unlock the SIM card by applying the PUK code, which is also hidden under a protective layer. If this did not help you, then contact the nearest communication salon to restore the Beeline SIM card.
If the activation of the SIM card was successful, then you should check your personal account for crediting you with the starting amount. You can do this in one of three ways:
1) Send a USSD request to 102.
2) Call 0697.
3) Send a balance request using the SIM menuBeeline.
The iPad owners can activate the SIM card as follows:
- Go to the menu and find the "Settings" section.
- Open "Cellular data" and select "SIM programs". After that, a special menu will appear on the screen.
- Going to the "My Beeline" section, click on "Other Services", and then select "SIM card activation".
- In the window that opens, find the "OK" button. Click on it, thereby confirming the activation process.
- Notification of successful activation of the SIM card will come to you in the form of an SMS message.
We hope that the information collected in this article will be useful to you.
