For many years, Samsung washing machines have been top sellers in the consumer market. Probably, many owners have such an assistant who can make their daily life as easy as possible. Despite their quality characteristics, even washing machines from this leading manufacturer, like any equipment, can fail due to various breakdowns. One of the reasons for the poor functioning of the unit or its breakdown is the bearing assembly.
It is possible to fix the breakdown with the involvement of companies working in the field of repair of various types of household appliances, but this will require additional financial costs. If this is not possible, you can do this work yourself. How to change the bearing on the Samsung washing machine,will be discussed in this article. To carry out repair work, you must carefully read the instructions provided.
Dependence of the efficiency of washing equipment on the bearing
The performance of the washing machine will depend on the quality of the bearings, since it is these parts that perform the function of uniform rotation of its drum. The units are equipped with two bearings, and their location is the inner plane of the tank. They have different sizes and therefore carry different loads. In the event of a bearing failure, the quality of the “Wash” and “Spin” options will immediately change. In this case, the question arises of how to change the bearing on the Samsung washing machine, because continued use of the device can lead to more serious damage.
Main causes of deterioration
They are divided into two types:
1. Natural wear. The service life of the bearing installed in the washing unit is 5-6 years. As a result, bearing replacement after 5 years is not considered a failure, but is defined as normal wear and tear of the part.
2. Premature failure. It can be due to several reasons, such as:
- Worn oil seals. They perform a protective function for bearings from contact with water. Violation of its tightness due to water penetration will lead to gradual washing off of the lubricant, which will be the main reason for the formation of corrosion.bearing.
- Failure to comply with the weight of the laundry placed in the washing machine drum.
- Failure to follow the installation rules of the unit.
Reason for changing bearings
The process of replacing a bearing is a complex and time-consuming operation. It provides for the complete dismantling of the device. Therefore, before changing the bearing on the Samsung washing machine (6 kg) (on the drum), you should correctly determine the culprit of the breakdown. To do this, you need to pay attention to the following signs of the unit's performance:
- sound changes while executing different options;
- poor performance of spinning clothes;
- the appearance of a leak under the lower base of the case;
- backlash formation during the rotation of the machine drum.
If bearings are not replaced on time, more complex damage may occur:
- destruction of the seats of parts, which will lead to failure of the tank;
- mechanical damage to the shaft connected to the cross mounted on the drum.
Tools needed for repair work
To replace the bearing on a Samsung washing machine you will need:
- Set of hand tools with screwdrivers and wrenches.
- Metal hammer.
- Machinery chisel.
- Pliers or other electrical tools.
- Lubricant.
- A hermetic substance with a high resistance to high temperatures.
Recommendations from repairmen
When performing repair work to replace the bearing on the Samsung washing machine, you should pay attention to some recommendations from repair specialists for such equipment:
- Lay out the removed parts, separating them by location.
- Record withdrawal order.
- To eliminate the problem of finding the desired fastener when assembling the machine, after removing the part, return the unscrewed fasteners to the seat and screw them slightly.
- All work on detaching parts should be done carefully to prevent mechanical damage.
Preparatory work
These are mandatory measures that must be completed before changing the bearing on the Samsung WF F861 washing machine, or any other model. You can start the dismantling process only after the following conditions are met:
- Determine the place where the repair work will be carried out. To do this, you must have free access to the equipment, as well as free space to accommodate dismantled parts.
- Disconnect the unit from the power supply.
- Shut off water access to the appliance by setting the water valve to the "Closed" position.
- We are disconnecting from all communication systems.
- Install the washing machine in a pre-prepared place.
Removing body panels one by onewashing unit
Owners of modern technology often have a question about how to change the bearing on the Samsung Diamond washing machine (6 kg). This is a fairly popular model, affordable for almost everyone. Start dismantling work as follows:
1. Removing the top bar.
The master will:
- using a screwdriver, unscrew the bolts located on the back of the case;
- carefully slide the panel and remove it.
2. Detaching the control panel.
For this you need:
- Remove the drawer for detergents. To do this, pull it out and press the latch located in the middle cell of the tray.
- Unscrew the two screws provided on the plane of the control panel.
- Unscrew the three self-tapping screws that fasten the inner base. They are located on the metal frame of the unit.
- Unscrew the screws that connect the control unit to the front panel and the instrument case.
- Pull the control panel in one direction (towards you), and in the opposite direction - the dispenser tank. This will detach from the dispenser base.
Do not completely disconnect the control unit. You can leave it on the plane of the case, since it is quite possible to change the bearing on a Samsung washing machine (4-5 kg) without completely dismantling it. It will not interfere withremoving the tank from the housing.
3. Removing the narrow panel. It is located at the bottom of the case on the front side.
4. Removing the housing front cover.
Required:
- Unscrew the screws that secure the inner plane of the base, where the container for powdered products is installed.
- The rubber cuff fitted between the round bases of the manhole and the drum must be removed. To do this, bend the rubber part and lightly hook the clamp with a screwdriver. Delete it and put it back to the removed parts.
- Unscrew the fastening elements equipped on the front of the case (3 pcs at the top and 4 pcs at the bottom).
- Remove the panel. The process of detaching the panel from the case must be carried out with extreme care to prevent mechanical damage to the plastic latch.
- Disconnect the electrical connector from the door interlock element.
- Put aside the removed panel.
Process of detaching components
Having finished the process of removing the panels, we proceed to the next stage of disassembling the machine:
- Disconnect the connecting hoses from the inner base of the dispenser by loosening the metal clamps.
- Remove the counterweight by unscrewing the fixing screws. Pay attention to the large weight of this item.
- Dismantle the water level sensor connected by a rubber hose to the base of the dispenser. We perform the removal of the clamp installed onrubber hose to release the part from the hose.
- Disconnect the pipe, which is the connection between the tank and the dispenser element.
- Remove the counterweights, equipped on the plane of the tank. Remove six bolts using a socket wrench.
- We perform detachment of the branch pipe from the tank, equipped in the lower plane of the body. It connects the tank to the drain pump, from which we also disconnect it.
- Remove the horizontal metal profile located at the top of the case. To do this, unscrew a few fasteners.
- Remove the back cover by unscrewing the screws with a screwdriver.
- It is necessary to disconnect the contacts of the heating device (heater) using electrical pliers.
- Disconnect the shock absorbers of the tank and carefully remove the tank from the body.
The process of removing the drum from the tank
To disconnect the tank, it is necessary to position it so that there is a pulley in the upper part, which is also subject to dismantling. But first you need to remove the drive belt from the electric motor and pulley and disconnect the tank from the motor by unscrewing the motor fasteners. Only after completing these steps, unscrew the bolt installed in the center of the pulley using a hexagon. Then we remove the pulley using the method of slightly scrolling the part.
Remove the clips,we divide the tank into two parts and remove the seal installed between them. One of them will have a drum. We knock out the shaft using a hammer and remove the drum from the part of the tank.
How to change the bearing on the Samsung washing machine (5 kg) on the drum
You can buy new parts at retail outlets or specialized stores. But before you change the bearing on the Samsung washing machine (3-5 kg), you need to choose the right size of components. The best option would be to have worn-out parts with you. Bearings and seals should also be replaced immediately. The latter are purchased in accordance with the size of the former part.
Before you change the bearing on the Samsung washing machine, first of all, you need to inspect the shaft, cross and seats for mechanical damage. If the parts do not have any flaws, we clean them from the dirt accumulated during their operation. We remove the oil seal using a slotted screwdriver, proceed to the removal of worn bearings. The outer bearing is knocked out first when using a special puller or chisel. In the case of using a chisel, it is necessary to install it on the rim of the part and apply uniform blows with a hammer to prevent distortion of the part. This action will remove it from the landing slot. The inner bearing is knocked out in the same way.
Perform technical work for installationnew parts: cleaning the seats from dirt, treating with WD-40, applying lubricant.
Starting to install unused bearings in the sockets. We install first the inner and then the outer bearing. Parts are installed only evenly and against the stop in the seats. The oil seal treated with grease is placed on the upper base of the bearing.
Return the drum and the shaft to their original place, in the plane of the tank part, and perform the process of connecting its parts: apply sealant to the edge of the base of one of its parts, put a seal between them, install the fixing latches.
Assembling the washing machine. This completes the repair work aimed at changing the bearing on the Samsung washing machine. You can test your repaired machine by running a quick wash cycle.
