Headset problems are quite common. Often this is due to poor quality products. Not always the manufacturer pays much attention to the creation of headphones. Especially when it comes to budget models. Although even the cheapest options can last for years.
As a rule, cost does not always play a key role. Sometimes users complain that expensive headphones have become quieter or even broken. You don't have to panic right away. Sometimes you can solve all the issues yourself.
Causes of breakdowns
First of all, it is important to understand the causes of problems: what they can be and what to expect from them.
If the headphones began to play quieter, then the problem may be hidden in improper operation. Of course, it is unlikely that someone will deliberately dip the headset into water or throw it into the sand. All this will undoubtedly lead to problems that, most likely, nothing can be done.
But there are minor breakdowns that can disrupt the device. For example, the headphones began to play quieter, because they got drops of water, etc.e.
Possible problems
There are still the most common problems:
- contact closure to case;
- demagnetized speaker;
- foreign garbage;
- problems with the device to which the headphones are connected;
- mechanical damage.
Of course, this list could be longer. For example, marriage, which is often found in budget models, cannot be ruled out.
It will not be easy to fix the above problems on your own. Without proper skills, it is impossible to check a demagnetized speaker or contact closure. But to solve the problem with garbage and the device to which the headphones are connected is real.
Wire contacts
So, contact closure or marriage is a common problem. Especially when it comes to the plug. Poor-quality headphones are especially prone to this failure, as they are made of poor materials.
Most vacuum models are often used daily. The plug is bent, pulled out and dirty. All this affects him not in the best way. Over time, problems arise. It happens that the sound disappears altogether, and sometimes you notice that the headphones began to play quietly.
The problem with this problem is that outwardly there are no signs, but the wire was frayed inside, which led to such a breakdown.
Solving the problem with wire contacts
Often the plug is a non-separable element. It cannot be unscrewed or removed for repair. In this case, you can purchase a new one and replace it with it.old. Of course, this option requires soldering skills. Just cutting off the plug and sticking a new one won't work.
If you can't handle it on your own, you'll have to take your headphones in for repair. And then it is rational to do this only if the headset is really expensive. Cheap headphones are easier to throw away.
Broken soldering
This is another problem that can cause the headphones to play quieter. Unfortunately, even an expensive headset can be poorly soldered. This is due to the fact that the manufacturer is trying in every possible way to save money. Of course, he tries to spend less money on assembly and materials.
Also often caused by a marketing decision. If we find a successful device, we are ready to use it for years. Not all users are chasing fashion. But this state of affairs is unprofitable for the manufacturer. Therefore, you need to create devices that would not work forever.
Poor soldering may be caused by environmental regulations. In this case, manufacturers use those components that do not harm the environment. But often such materials are fragile and short-lived.
Repair of broken soldering
In this case, again, you can solve the problem yourself. If you understand how headphones work, you can try taking them apart to replace the soldering. But this solution is not always possible, since some headset models are non-separable. The user in the process of repair may damage other elements,which cannot be repaired.
Therefore, in this case, you can also contact the service center or purchase new headphones.
Cable broken
This is a mechanical issue. Many do not understand why the headphones began to play quietly, although a cable break could be the main reason. Sometimes you can see it with the naked eye, and sometimes you have to grope, because it happened inside the shell.
By the way, this problem often occurs when there is a sharp physical load on the wire. For example, you suddenly stood up or caught on something with a cable, after which tension and breakage occurred inside. If you use headphones at a computer, and the wire is so long that it often gets tangled under your feet, you could run into it with the wheels of the chair, and accordingly, damage them.
Cable Break Repair
If such a breakdown occurs, there is only one solution - to change the cable completely. Of course, it is not easy to do this on your own, especially if you do not have the proper skills. Therefore, many turn to the service center. But you need to understand that if the wire is very thin, then similar problems will often occur with it in the future. It will be easier to replace the headphones with new ones.
Water or debris got in
What to do if the headphones began to play quietly? Maybe they got water or debris in them. These are the most common causes of failure. Some headphones may be damaged even after they get a couple of drops of water or a little dust accumulated. If you quickly take all the necessary measures, you can fix the problems yourself.
What to do if water gets in?
First you need to dry your headphones. You can do this in several ways. Try putting them next to a warm battery. But by no means above. The battery may become very hot and damage the circuit board inside the device.
Alternatively, you can send the headset in a bag of dry rice. Groats quickly absorb moisture and in a day can take away all the excess water that was in the headphones.
But here it is worth understanding that the oxidation of contacts occurs very quickly. If the headphones still work properly for the first couple of weeks, then over time you will begin to notice sound problems. It will become quieter, the device will buzz or make noise. In this case, specialists in the service center will be able to help.
What to do if there is garbage?
Ear pads will get dirty over time. This must be understood and taken care of in advance. It happens that the headphones began to play quietly on the phone due to the fact that the mesh was clogged with earwax and dust. Over time, you will begin to notice that one earphone has become much quieter.
In this case, you will have to clean them yourself. To do this, take hydrogen peroxide. It is needed in order to rinse the nets from dirt. You can clean them in any container, for example, in a bottle cap.
Depending on the structure, you will have to bathe the headphones differently. If it is possible to separately clean the grid, then you will have to remove itfirst. If this does not work, then you can try to dip the mesh along with the earpiece so that water does not get on the speakers.
After such cleaning, it is important to put the earphone with the mesh down so that the remaining moisture does not flow inside. It takes more than an hour to dry.
Device problems
But not always a breakdown can be associated with headphones. Sometimes the device to which they are connected is to blame. For example, if the headphones have become quieter on the computer, try connecting them to your phone or another PC. It may be that the sound settings in the system have gone astray, and therefore it seems that the headset is broken.
If the headphones work well on another device, you will have to set up your computer. If no changes have occurred, then you will have to look for the cause directly in the headset.
Reviews
Headphone problems are not uncommon. Those who often listen to music are faced with headset breakdowns very often. Some budget headphones do not live even two months. Even expensive models can break.
Most users who experience this problem say they rarely take their headphones in for repairs. Most often, they throw out a broken device and get a new one. Of course, if we are not talking about an expensive headset, especially a gaming one. In this case, you have to contact the service center.
There are even fewer users who try to fix their headphones on their own than those who go to a service center. This is because not everyone hasthe right tools and skills to deal with a breakdown.
