A set of security measures to protect the car is provided by various systems, one of which is the Starline B9 car alarm. The complex not only protects the vehicle, but also gives the driver confidence that everything is in order with the car. Alarm "Starline B9" provides complete information about the condition of the vehicle, which allows the owner to remain calm during long absences.
Signal Features
The security complex "Starline B9" controls several zones at once:
- The hood, doors and trunk of the car are controlled by limit switches.
- Wheels, body and windows - two-level shock sensor.
- Digital and conventional relays - engine start.
- Ignition of the car by voltage sensor.
- Parking brake - limit switch.
The selection and interception of the system code is impossible due to the original dialog control code and the "friend or foe" coding algorithm. The initial state of the Starline B9 alarm is saved in the event of a shutdown and is restored whenreturn of power. The engine blocking remains unchanged when the external power is turned off if the car is armed at the time of the shutdown. The alarm cycles coming from the sensors are limited. You can interrupt alarms without disarming the car.
Anti-theft and security features
According to the instructions, the Starline B9 alarm system is equipped with a rich set of functions, including programmable activation of the power unit depending on temperature and time. As well as remote engine start.
Alarm "Starline B9" is equipped with the following functions:
- Turn on the alarm when the sensors are activated in armed mode. The feedback panel sends a signal and an alarm notification.
- Automatic blocking of the car engine when the immobilizer mode is on 30 seconds after the ignition is turned off, regardless of which particular security mode is activated.
- Depending on programming in anti-robbery mode, the following occurs: engine blocking, automatic closing of door locks in pulse mode for the first 30 seconds, then - on a permanent basis.
- Turbo timer mode for turbocharged vehicles. Supports the operation of the engine after the ignition is turned off until the turbine stops completely. With the simultaneous activation of the protection, the system temporarily blocks the ignition inputs and disables the shock sensor, bypassing the engine. Armingis carried out after disabling this mode.
- Deactivation of the security mode can be carried out without a key fob by dialing a personal code or other functions. In both cases, the service button is used to disarm the car.
- Personal emergency shutdown code can be programmed and includes up to three digits.
- When disconnected from the connectors of the Starline B9 central signaling unit, the car remains armed, and the engine is not unlocked.
System service functions
A number of service functions are available in the Starline B9 alarm system: silent protection, armed mode with the engine running, panic mode, silent activation and deactivation of functions, car search and work with GPS / GSM modules. The system automatically diagnoses the state of the sensors, bypasses the fault zones and issues a full report. There are several ways to start the engine: remote using a key fob, switching on by a timer, alarm clock or temperature. You can program the system depending on the features of the vehicle - the presence of an automatic or manual transmission, a different type of power unit.
Alarm package
The security system "Starline" is supplied as follows:
- Starline B9 installation kit: central unit, antenna with transceiver module, temperature sensor, driver call button, cable set.
- Two-level shock sensor. Detects strong and weak impacts, to which the system reacts with a series of short beeps or activation of a full-fledged alarm.
- Temperature sensor for motor.
- Remote controls - three-button key fob without screen and feedback function and key fob with LCD screen and feedback.
- Operating instructions "Starline B9".
- Installed in the car LED that serves as an indicator of the operating mode.
- Emergency switch - a key installed in the car in such a way that it has free access, but at the same time its location was hidden.
- Documentation for installation and operation - instructions for Starline B9, warranty card, service papers.
Remote control key fobs
The car alarm kit includes two key fobs - main and auxiliary. The first is equipped with a liquid crystal screen and three keys, coupled with a feedback function. The current state of the car alarm is displayed on the key fob display using clear icons. System programming, according to the instructions for Starline B9, is carried out using a key fob. The key fob display shows such information as the temperature of the passenger compartment and the vehicle engine, additional parameters. The battery is a 1.5V AAA battery. Its charge lasts for 6-9 months of operation of the key fob, depending on the intensity and frequency of use.
Assignment of keystrinkets
The button assignments are the same on both remote controls:
- Key 1. Activates security mode, locks locks, controls shock sensor levels.
- Key 2. Disables security, unlocks locks, disables the alarm. Controls an additional sensor and anti-robbery mode.
- Key 3. Activates the temperature indication mode, fixes the alarm status, turns on an additional channel and cursor selection of functions.
Advantages of Starline B9 signaling
The presented car alarm model occupies one of the highest positions among similar security systems. The scope of the alarm system is significantly expanded due to the possibility of connecting additional modules - ultrasonic, microwave sensors, pressure and tilt sensors. The system itself is built according to the relay type, thanks to which the complex can be installed anywhere in the car. The Starline DRRTM radio relay provides blocking of machine nodes.
The central alarm unit consists of 7 relays that control electric door locks, ignition, starter, light and sound, and other equipment. A feature of the Starline alarm system is the ability to remotely control the system via GSM channels in their coverage area. Simply put, you can control the security complex using a regular phone. To use this function, you need to install a GSM module. The device is equippedthree additional inputs for equipment. When the sensors are triggered, the phone receives a call or SMS alerting the car owner about the incident.
Recommendations
The Starline B9 car alarm is installed on vehicles with an on-board voltage of 12 V. According to the instructions for Starline B9, it is advisable to place the central control unit in a hard-to-reach place. In most cases, the block is placed under the dashboard.
The antenna and the transmitter module are attached to the windshield, which guarantees the maximum range of the latter. The temperature sensor in the car interior is located in the module, and therefore its location must be carefully considered. It is advisable to place the devices in such a way that they are not exposed to direct sunlight, heating systems and other heat sources.
The shock sensor is also desirable to be placed in the cabin, since it requires regular and convenient access for adjustment. In this case, it must be firmly attached to the body. The temperature sensor is attached to the engine or to its metal parts. Automatic engine start works correctly only with accurate temperature measurement.
Valet service key is located in a hidden but accessible place for the driver. You should not place it in those places that are not quickly accessible, since the button is usually required in emergency situations. ActivationValet mode is carried out mainly when sending the car for repair to the service station. In this mode, some of the alarm functions are disabled, so there is no need to give key fobs from the system to the service center employees.
