Apple products are known for their quality build and excellent performance. But for various reasons, equipment may need repair. Often this happens due to the sloppy attitude of a person. Replacement of the glass on the iPad 2 is required due to damage or other factors. This is described in the article.
Causes of glass breakage
The display usually cracks when the device is dropped. In addition to mechanical impact, glass breaks for the following reasons:
- Factory flaws. Prolonged use of the device leads to an increase in temperature. If the display is of poor quality and there is air in it, then it bursts with heat.
- The use of Chinese components in the repair. Cheap spare parts are different from the originals, therefore, due to various factors, they deteriorate quickly.
- Battery swelling. The deformation of the battery leads to an increase in pressure on the glass, due to which it bursts.
- Deformation of the case. Even if with the fall the device is leftin order, the deterioration of the glass occurs later. The display may break due to the shape of the case.
When should I change my screen?
Replacing the glass on the "iPad 2" is performed not only because it broke, but also some problems with the touchscreen:
- No response to pressing.
- Incorrect touch handling.
- Part of the touchscreen does not work.
- There are cracks.
For such problems, device repair is required. After a professional display replacement, "iPad 2" will work properly again.
Diagnosis
Before the glass is replaced on the iPad 2, diagnostics are required. The procedure allows you to determine what is broken, as well as because of what it happened. Moreover, there are not always external signs of a malfunction.
Often the touchscreen module and the screen matrix break down with the display. Then not only the replacement of the iPad 2 screen is necessary. In modern versions, it is usually necessary to change the entire screen module. You should not carry out diagnostics yourself, it is better to entrust this work to professionals.
Repair difficulties
Replacing glass is considered a complex procedure that requires skills and abilities. When repairing, there may be the following problems:
- Torn trains. This is due to the incorrect removal of broken glass, especially when this work is done by the users themselves.
- Wrong glue. Glass should not be attached with super glue as it willbreak even with minor impacts. And the workshops use double-sided tape.
- Glass cleaning. The old glue must be removed completely, only then it will be possible to install a new screen with high quality.
There may be wrinkled corners on the device case. Due to additional defects, the work of the master is complicated, therefore the cost of repairs will be more expensive.
Why should I contact the service center?
Repair "ipad" should be performed by the master. He will make sure that no mistakes are made during the work. When working, dirt and dust should not get inside the device. Otherwise, it is necessary to clean, disassemble the tablet again. When ordering work from a professional, a person receives the following benefits:
- Quality service.
- Using original parts.
- Professional technology work.
- Short repair time.
- Warranty.
The "iPad 2" device is made in such a way that repairs are easier than with other equipment. But there are a lot of screws in the tablet, so for disassembly and assembly you need to have experience and knowledge, special tools, equipment. All this can only be provided in a professional center.
Cost
Masters start repairing iPad with diagnostics. After this procedure, it will be possible to set a price, since it all depends on the complexity of the work. How much does it cost to replace glass on an iPad 2? The minimum price is 1500-2500 rubles. It also depends on speed.work. If other defects need to be corrected, the price increases.
Repair time is usually 30-60 minutes. When replacing, the old glass is removed, the body is cleaned of glue, glass, and then the body is fixed. Then, with a constant air flow, the new display is installed. A special double-sided adhesive tape is used for fastening. If everything is done correctly, then the new screen will be fixed perfectly.
How to increase the life of glass?
What needs to be done to make the touch glass work for a long time. Although the device has a scratch-resistant display, it can still crack and break. To prolong the life of the iPad 2, you need to take care of it, that is, protect it from falls, and also avoid excessive loads. Devices are worn in briefcases, in cases.
It is important to use a protective film that protects the screen from many adverse factors. Thanks to her, the display will not deteriorate from dirt, scratches. Some films have an anti-reflective effect, which makes the tablet suitable for use in direct sunlight.
Often the screen is damaged by falling on the corner. The iPad 2 has a body made of soft aluminum, so the impact results in a uniform breakdown of the entire area. To minimize the negative consequences, you need to use covers that cover the case. The device must be protected from falling into water, as liquid causes many systems to fail.
Thus, repairing the screen on"iPad 2" is best done in a professional workshop, otherwise independent activity may impair the operation of the equipment. And then you still have to pay for the restoration of the device in a specialized center.
