Almost every fisherman has a tackle in his collection, on which a non-inertial reel is installed. This device must meet all the requirements, because otherwise you will not see successful fishing. Such devices cost a lot, so they are often purchased in a single copy and used for several years.
Thus, you need to carefully consider the choice of coil.
Inertialess devices must have the following characteristics. The quality of the fixture depends on the gear ratio and power. The smaller the first parameter, the more power the inertial coil has. The gear ratio represents the ratio of the lines of the line stacker to the number of turns of the handle.
This ratio varies from device to device. Therefore, when determining the power of the coil, you should look at the gear ratio, which, for example, can be denoted 4:1. This means that for one turn of the handle the line handler will perform fiverotations.
The performance of the reel is affected by the diameter and length of the spool, as well as the number of bearings. It turns out that the larger the diameter and length of the spool, the further you can cast the bait. Also, an inertialess reel is considered to be of better quality if it has more bearings in its design.
The reason lies in the fact that in this case, the load falls on the rotating components of the device more evenly. However, you need to be careful, because there are coils of not the highest level, which have many bearings made of low-quality material. It is better to pay attention to well-known companies.
The performance of the device is affected by the friction brake, which ensures the rotation of the spool with the force exerted on the fishing line. With this function, you can prevent the line from breaking when the fish resists. A high-quality friction brake lowers the line without jerks, smoothly. Adjusting the reel mechanisms makes it possible to strengthen or loosen the spool clamp, which will allow you to work using lines of different diameters on one device.
When choosing a coil, you need to look at where the friction brake is located. It can be located both behind and in front. In this case, the choice depends only on the personal preference of the fisherman. Most people purchase inertialess reels with a rear drag, despite the fact that they are considered more reliabledevices with a front brake.
Instant stopper designed for reversal, useful when bottom tackle is used to fish. With this coil element, you can fine-tune the nod. It should be noted that the smaller the backlash, the better the device.
Reliable inertial-free reel has in its design a tapered line roller, which, as a rule, has a hard coating on the bearing. This element helps prevent twisting of the fishing line.
