Lenovo A319 is an inexpensive but rather impractical phone. This device often has such a bug: when turned on, it may start to reboot endlessly or not boot beyond the Lenovo branding that welcomes the user. But in fact, these problems are easily solved by changing the firmware of the smartphone. In this article, you will learn how to flash Lenovo A319.
What software do you need?
Before you figure out how to flash Lenovo A319 through a computer, you need to install a special program on your PC, with the help of which the smartphone firmware will be changed. It's called the Flash Tool.
Another file that needs to be downloaded is the firmware itself. Its user can choose independently. There is a lot of material on specialized sites or forums specifically for this Lenovo smartphone model.
To find out how to flash Lenovo A319, you also need to install a driver for this particular phone model in Windows. It can befind on the Web or trust Windows Update, which will find the right file and install it.
How to flash Lenovo A319: step by step instructions
The first thing to do is to remove the battery from the device and do not install it until the flashing is completed. This is a mandatory condition that must be strictly observed.
The second step is to open the installed Flash Tool.
Third - you need to go to the Scatter File section and find the downloaded firmware file in the system. It is likely that it will be signed as "smartphone processor model (for example, MT6572)android_scatter".
The fourth step is to wait until the firmware is loaded into the program.
Fifth - you need to find the block DA DL All with sum check. This is necessary in order to give a command to the program that the firmware will be installed on a phone without a battery. Once again, pay attention to the very first step of the instruction.
Sixth - go to the "Format" item, where you need to put dots in front of the Auto Format Flash and Format whole flash graphs. You need to click "OK" and connect your smartphone via a USB cable to your computer.
The processor will perform the seventh action itself. It will format the smartphone. After completing the process of initialization and disk partitioning, you need to disconnect the smartphone from the cord and click on the Download button.
Eighth - you need to connect the USB cable to the phone and computer. If the Lenovo driver has not been installed, the system will either give an error (andthen you have to install it manually), or try to find and install it yourself.
Ninth - the process of downloading new firmware to the smartphone has begun. As soon as it is installed, the program will show a small window with a green circle - the flashing is completed. Now you have learned how to flash Lenovo A319.
Result
Learning how to flash the Lenovo A319 turned out to be easy. Moreover, the flashing process itself took quite a bit of time (on average, eleven minutes). But that's not all: the rest of the smartphones are reflashed according to the same principle. True, you should not think that the firmware is installed the same on all devices. Each manufacturer has its own system programming features that must be taken into account when reinstalling the firmware on a smartphone. For example, in the case of Lenovo A319, this is a preliminary removal of the battery in order to successfully change the operating system of the device.
This should always be taken into account so as not to turn the smartphone into a "brick".
