Whirlpool washing machines with a vertical loading type are quite in demand among consumers. The reason for the high demand, judging by user reviews, is the high quality of the European assembly, modern design and innovative technologies. But, like any equipment, washing machines from this manufacturer can fail. The reasons for the breakdown can be different: improper operation, wear of components, marriage, etc. This article will discuss the main malfunctions of the Whirlpool washing machine with vertical loading, their characteristics, error codes indicating a breakdown, methods of elimination and tips for correct operating the appliance.
Features of models
The Whirlpool top-loading washing machine has all the features that the units havefront type. The structural difference of vertical machines is the location of the parts: the doors for loading linen and the control module located in the upper part of the body. The dispenser for detergents is equipped on the inside of the door for loading laundry. Many models of vertical machines are equipped with rollers located on the bottom of the body, which allows you to move them without much effort.
Another feature is the drum. It is equipped with two doors. The doors are opened and closed manually by pressing the latch. Thanks to this design, the user has the opportunity to report the linen during washing, after stopping the current mode.
It is this loading method that makes it possible to reduce the dimensions of the washing machine. The width of such models is a maximum of 45 cm. Small dimensions allow you to install equipment in rooms with a small area. It should be noted that the laundry capacity indicator is from 5 to 8 kg, depending on the model of the washing machine.
Quality characteristics of washing machines
In models of this type of machine, the loading of dry laundry into the drum is carried out in the upper part of the body. It is the type of loading that indicates the main advantages of using this technique:
- Interrupting the process of running an installed program. If you need to change the program or add laundry to the machine, you can interrupt the machine and restart it by settinganother program.
- Control system options: mechanical, electronic or mixed control.
- Whirlpool washing machine warning methods. Using the unit he alth diagnostic program allows the owners to quickly determine the “culprit” of the breakdown.
- The use of the additional "Aqua stop" function protects the unit from water leaks during the execution of the "Wash" option. If the pressure changes, the unit will stop functioning.
- Using innovative Sixth Sense technology. This technology allows you to adjust the washing parameters, taking into account the weight of the laundry placed in the drum. The program used automatically determines the required amount of water and the time to complete the wash, as a result of which the consumption of water and electricity is reduced.
- Application of direct drive inverter motor. Motors of this type are not equipped with brushes, which can significantly reduce the noise level during the execution of installed programs. The part is installed directly on the tank using fasteners.
Control types
The manufacturer produces models with three types of control. The consumer has the opportunity to choose the most optimal option for himself. The control of the Whirlpool washing machine can be:
- Electronic. Such models are equipped with a display and buttons located on the control panel. The program is installed withbuttons. The display shows information about the time and washing cycle, as well as breakdowns. When a malfunction is detected in the Whirlpool top-loading washing machine, a code value will be displayed on the display panel.
- Mechanical. Such models are equipped with a manual regulator, with which the necessary washing program is set. Also on the control panel are service indicators that inform not only about the washing cycles in progress, but also about malfunctions.
- Combined. The control panel will house mechanical adjustment keys and an electronic control system.
Compliance with the rules of operation
Before you start installing and starting the device, you need to read the manufacturer's instructions, which indicate the types of functions, the programs used and how to control them.
When determining the location of the top-loading washing machine, it is worth taking care of free access to the upper space where the laundry will be loaded and unloaded.
The correct installation of the device is of great importance. Leveling will eliminate its vibration during the execution of specified programs. The floor surface must be level. Judging by user reviews, for proper installation and vibration reduction, many use special soft foot pads. They are made of soft rubber, and are able to absorb strong vibrations of the device duringspin.
Compliance with the basic requirements for the use of top-loading washing machines will increase their service life. Manufacturer recommends:
- do not exceed the weight limit for loading laundry into the drum;
- correctly select the program depending on the type of product, as well as taking into account the degree of its contamination;
- do not exceed the amount of detergent;
- perform periodic maintenance of equipment;
- prevent foreign objects from entering the tank.
The main malfunctions of the Whirlpool top-loading washing machine and how to fix them
According to feedback from users and specialists, the following problems most often occur:
- Fault in the operation of the control unit. In this case, after turning on the machine, a chaotic ignition of all indicators is observed, or during the execution of the “Wash” function, its mode is violated. To eliminate this breakdown, it is necessary to determine the board that is the cause of the failure of the control unit. To correct this malfunction of the Whirlpool Top Loading Washing Machine, you must contact a qualified technician.
- Failure to execute the "Water drain" option. This problem can only occur on the last cycle of the washing machine. If water remains in the tank, disconnect the appliance from the power supply and drain the water using the emergency drain hose. The cause of the breakdown may be accumulated debris or failure of the pump. It is necessary to clean the filter from accumulatedpollution.
- Failure of the heating element. If within 10 minutes after starting the machine in the “Washing” mode there is no increase in water temperature, then the “culprit” of the breakdown is a tubular electric heater. Such a malfunction of the Whirlpool washing machine, both front-loading and vertical, most often occurs due to hard water, poor-quality chemicals, or a power surge. If the heating element fails, it will need to be replaced.
- Spontaneous opening of the unit doors. If the flaps fail to work, it is necessary to stop using the washing machine, as the drum may jam. This problem may be caused by overloading, uneven distribution of items inside, or a malfunctioning drum latch.
- Increasing the noise level during the execution of the set program. In case of increased vibration, the appearance of crackling, knocking during operations, it is necessary to stop the operation of the washing unit. There may be foreign objects in the drum. In this case, remove the laundry from the drum and inspect it for foreign objects.
What is the error code?
A useful option for vehicle owners. Fault codes for the Whirlpool washing machine are displayed on the electronic display panel of the unit. In this way, the control system notifies of the detection of poor performance or failure of parts. Each error value in"Whirlpool" corresponds to a certain breakdown. It is with the help of the displayed code that you can independently determine and eliminate the malfunction. To eliminate the error of the control system, and this can also be, you should disconnect the machine from the power supply and restart it after a few minutes. If this code is displayed again, the malfunction should be corrected.
Error codes indicating a problem with water supply and discharge
The following information indicates problems with the filling or drain system:
| Error code | Transcript |
| F01, FH | Insufficient or no water for washing. |
| F09 | Water level exceeded. |
| F13 | Slow flow of cold water. |
| F23, F24 | Failure to perform the control function when water enters the tank. |
| F03, FP | Failure during the program "Water Drain". |
Whirlpul washing machine codes notifying about failure of heating element and control system
The following messages on the display indicate a malfunction of the heating element, command apparatus or control system:
| Error code | Transcript |
| F04,F12 | No water heating at set time. |
| F05 | Faulty temperature sensor. |
| F08 | Electric heater failure. |
| F14, F16 | Fault in the control unit. |
Other malfunctions
The following errors speak of them:
| Error code | Transcript |
| F06 | Poor-quality functioning of the tachogenerator. |
| F07, F10, F11 | Fault in motor control system. |
| F15 | Electric motor failure. |
| F26, F27, F28 | The appearance of mechanical interference during engine operation. |
| F02 | Activation of the Aqua Stop protective function. |
| FDL | No padlock lock. |
| FDU | Hatch not closed. |
Judging by the numerous user reviews, top-loading washing machines from the American manufacturer Whirlpool are reliable and practical devices. Such models are convenient and easy to use. However, they, like any other equipment, sometimes breakage is inevitable. To understand the cause of the malfunction, it is enoughdecode the error code.
