In this short review, the procedure for setting up digital channels on a Samsung TV will be described step by step. This algorithm is universal and can be applied to any model of the named manufacturer. The general requirements for TV hardware specifications will also be outlined.
Hardware requirements
Before we figure out how to set up free digital channels on a modern Samsung multimedia center, let's find out the hardware requirements that will allow it to play such content.
Currently, there are two ways to transmit TV programs. One of them is based on an analog signal form, and the second is based on a digital one. In the first case, there can be only one TV program on one frequency. The picture is of poor quality. In the second version, there can be several channels. The image quality becomes much better.
TV broadcasts can beconditionally subdivided into cable and terrestrial. In the first version, TV programs are transmitted over wires, and in the second - without them.
DVB-C or DVB-C2 tuner must be specified in the specifications of the multimedia center to receive cable TV programs. Again, the latter is preferred for the reason that it is the most modern and versatile.
If you plan to receive terrestrial television wirelessly, then DVB-T or DVB-T2 support must be specified in the device parameters. By analogy with the characteristics of the previously discussed cable tuners, the second one is preferable.
Installation and switching
To tune in digital channels on a Samsung TV with a built-in digital tuner, you need to assemble such a multimedia center and connect it to a digital signal source for TV programs. First you need to get it out of the transport package. Then install the complete support or fix it at the place of operation, depending on where you plan to use it.
Next, you need to bring the communication wires to the place where the TV is used. One of them is a power cord. One end is connected to the entertainment system socket, and the other end is connected to the AC power supply. Next comes the signal wire. Its connector must be connected to the input marked ANT IN AIR/CABLE. After that, the device is ready to be switched on.
Procedure for scanning TV programs
The next step in setting up a Samsung TV isautomatic search on radio frequencies for available TV programs in digital format. To do this, after turning on the entertainment system, use the SOURCE button on the control panel to select the signal source, that is, select the AIR / CABLE item.
Next, open the "Settings" menu and select the "Channels" section. Now you need to select the item "Auto-tuning". The next step is to select the type of signal received: cable or analog. Initialize this procedure.
Next, the system will scan the entire frequency range and independently, without human intervention, will find all available programs. At the end, you will only be prompted to save the results. It must be answered in the affirmative.
At the final stage of how to set up digital channels on a Samsung TV of any model, you need to check the quality of the broadcast programs. To do this, you just need to switch the entire saved list step by step and check the quality of the pictures. After that, this multimedia system is ready for use.
Conclusion
This material described step by step the procedure for setting up digital channels on a Samsung TV. As you can see, this is a fairly simple procedure, there is nothing super complicated in it. Therefore, it is quite within the power of everyone to complete it without outside help.
