Each instruction supplied with the TP-Link router contains an algorithm for setting up network equipment, but not a word about solving connection problems. But without access to the software part of the router, the user will not be able to configure the device.
In this article, the reader will learn how to access the TP-Link router and its settings. A complete algorithm of actions will be proposed with a step-by-step solution to emerging problems. Naturally, to achieve the result, the user will have to use all the recommendations.
First power on
If we are talking about a completely new device, just purchased in a store and have never been turned on, then the performance of the connection directly depends on the computer settings. In fact, by connecting the wires correctly, as described in the instructions, the user can easily dock the two devices.
Then it's a matter of technique: how to enter the TP-Link router interface is indicated in the same manual. You need to enter the IP address of the network device in the address bar of the browser and specify the login and password during authorization (they are identical - admin). This procedure is simple and does not require any knowledge of information technology from the owner of the router.
Configured network equipment
There are situations when a user purchases a used router. Here the situation can be resolved in several ways. Knowing how to enter the TP-Link router (if the seller changed the factory settings and transferred the authorization information to the buyer), you can easily reprogram network equipment for yourself.
But there are situations when the user does not have information about the IP address of the router, as well as about the login and password. The problem is solved simply - you need to reset the network equipment to factory settings. This is done with a special Reset button, which can be found on the control panel. Next, the connection is made according to the instructions that come with the router. It also describes in detail how to log into the TP-Link router.
Tricks of providers
TP-Link products are quite popular among providers who provide network equipment to their customers for free (naturally, the user must connect on a contract basis). Here the situation for the owner is aggravated by the fact that programmers of organizations providing Internet access services very often install their own firmware with their own system.authorization. The password, of course, is not disclosed to anyone.
Before thinking about how to access the TP-Link modem, the user needs to make sure that his desires are reasonable. In most cases, the router is already configured and provides access to the Internet via both wired and wireless channels. But there are situations when you need to change your Wi-Fi password or forward ports. The problem is solved in several ways. You can ask the provider to change the settings or install the manufacturer's factory firmware.
Pitfalls in software update process
It would seem that it could be easier than downloading branded firmware from the official website of the manufacturer and installing it on the router? But there is a problem. The fact is that the user will not be able to access the "Administration" tab in the device control panel. You can hack anything - both software and hardware. The question here is different: does it really need to be done?
How to enter the settings of the TP-Link router without knowing either the login or the password? In addition, the network device itself has a non-standard firmware. Just. Find out the IP address of the router and, using a special utility, force the new firmware into the device. True, another question arises here: will the provider give its client network settings after learning that he is using a non-branded device.
On the other side of the wire
Thinking about how to log into the TP-Link router, the user forgets that in addition to problems withnetwork device inoperability can also be caused by the failure of the computer to “see” the router. The network card of any PC can be in three states: be disabled, work in static mode, or receive an IP address via DHCP. In the latter case, there should be no problems with connecting network equipment. But the first two states will have to be de alt with.
The network adapter can be disabled by hardware and software. If the device is not detected by the operating system, you need to go into the BIOS settings and enable it (or install the driver). A software adapter is enabled through the control panel. Looking for answers to the question of how to log into the TP-Link router, the user should not forget about the network settings.
User intervention
Going to the "Network Control Center", the owner should find the item "Change adapter settings". Next, the desired network connection is selected, and after calling the alternative menu of the selected icon, the user needs to go to the adapter properties. Everything is simple here. In the list of active components, you need to find the "IP version 4" menu and go to its properties.
In the menu that opens, the user must cancel the manual network settings by checking the box next to the inscription: "Receive automatically". You need to do this for both the IP address and the DNS. In general, before accessing the TP-Link WR841N or any other network equipment, it is better to immediately make sure that the computer is configured to automatically obtain the address and domain name of the server (DNS).
In conclusion
As you can see from the review, there is nothing complicated in connecting a router to a computer. Yes, you need to spend more time on unnecessary procedures such as resetting, flashing network equipment, or changing personal computer settings. But these are ready-made solutions that will really help any user solve connection problems.
When wondering how to access a TP-Link router, any owner should understand that in most cases (99% probability guaranteed), the solution to the problem directly depends only on him. And of course, from knowledge that will always help to solve any task.
